SECTION PWC POWER WINDOW CONTROL SYSTEM

CONTENTS

Table Caption: This table of contents outlines the diagnostic and repair procedures for a power window system, covering the main switch for both Crew Cab and King Cab models, individual switches, and the power window motors for both driver and passenger sides, including rear components. It details system diagrams, component descriptions, and specific diagnostic steps using CONSULT-III functions.

A

B

C

D

E

F

G

H

I

J

PWC

L

M

N

O

P

Table Caption: This table appears to be an index or table of contents for a technical manual, likely related to vehicle repair, specifically focusing on power window systems and related components like doors and control modules.

BASIC INSPECTION

DIAGNOSIS AND REPAIR WORKFLOW

Work Flow

DETAILED FLOW

1. OBTAIN INFORMATION ABOUT SYMPTOM

Interview the customer to obtain the malfunction information (conditions and environment when the malfunction occurred) as much as possible when the customer brings the vehicle in.

>> GO TO 2

2. REPRODUCE THE MALFUNCTION INFORMATION

Check the malfunction on the vehicle that the customer describes. Inspect the relation of the symptoms and the condition when the symptoms occur.

>> GO TO 3

3. IDENTIFY THE MALFUNCTIONING SYSTEM WITH 'SYMPTOM DIAGNOSIS'

Use 'Symptom diagnosis' from the symptom inspection result in step 2 and then identify where to start performing the diagnosis based on possible causes and symptoms.

>> GO TO 4

4. IDENTIFY THE MALFUNCTIONING PARTS WITH 'COMPONENT DIAGNOSIS'

Perform the diagnosis with 'Component diagnosis' of the applicable system.

>> GO TO 5

5. REPAIR OR REPLACE THE MALFUNCTIONING PARTS

Repair or replace the specified malfunctioning parts.

>> GO TO 6

6. FINAL CHECK

Check that malfunctions are not reproduced when obtaining the malfunction information from the customer, referring to the symptom inspection result in step 2.

Are the malfunctions corrected?

YES >> Inspection End. NO >> GO TO 3

INFOID:0000000004056251

A

B

C

D

E

F

G

H

I

J

PWC

L

M

N

O

P

FUNCTION DIAGNOSIS POWER WINDOW SYSTEM

System Diagram

INFOID:0000000004056252

System Description

MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH INPUT/OUTPUT SIGNAL CHART

**Table Caption: This table outlines the input signals, functions, and actuators associated with various power window and door lock/unlock switches, including the main switch, a right-hand switch, rear switches in a crew cab, and the Body Control Module (BCM). It details how each component interacts to control power