Information Update

Microsoft $ ^{®} $ Updates

The following issues are documented on the Microsoft Help and Support website at support.microsoft.com:

• Systems running Microsoft $ ^{\circledR} $ Windows Server $ ^{\circledR} $ 2003 or Windows Server 2008 cannot be set into hibernation mode if they have more than 4 GB of memory installed. For more information, see the knowledge base article at support.microsoft.com/kb/888575.

• Systems running Windows Server 2008 do not support iSCSI boot when they have an SD card installed in the internal SD module. In addition, iSCSI boot does not work when an external USB storage device is plugged into the system. This is a known issue by Microsoft. For more information, see the knowledge base article at support.microsoft.com/kb/968410.

Flash Memory

The VFlash media provided by Dell is not partitioned to support the iDRAC6 Enterprise virtual flash feature. When you use the virtual flash feature for the first time, you are prompted to format the media using the iDRAC GUI.

Unified Server Configurator

Red Hat $ ^{\circledR} $ Enterprise Linux $ ^{\circledR} $ 5.3 does not work with the Unified Server Configurator operating system deployment.

MAC Address Label

For security reasons, the embedded NIC and iDRAC6 Enterprise MAC address labels provided with your system cannot be affixed once they have been removed.

U

NOTE: On Dell PowerEdge R610 and PowerEdge R710 systems, the labels are located on the information panel on the front of the system. On the PowerEdge T610 system, the labels are located on the front of the system.

Dell™ Update Package Information

During the Dell Update Package (DUP) installation process, you may see messages related to the following:

U

NOTE: These messages are for information only.

• Request for system reboot before the DUP installation is complete

• Windows $ ^{®} $ hardware detection

• Windows hardware configuration problem

• Re-enumeration of VFlash and momentary drive letter changes in Windows

△ CAUTION: It is recommended that no write operations take place (or performed) during DUP installation on VFlash.

DELL™

信息更新

Microsoft $ ^{®} $ 更新

以下问题已记录到 Microsoft 帮助和支持网站 support.microsoft.com:

运行 Microsoft $ ^{\textregistered} $ Windows Server $ ^{\textregistered} $ 2003 或 Windows Server 2008 的系统如果安装有 4 GB 以上的内存，则不能设置进入休眠模式。有关详情，请参阅知识库文章：support.microsoft.com/kb/888575。

运行 Windows Server 2008 的系统如果在内部 SD 模块中安装有 SD 卡，则不支持 iSCSI 引导。此外，当外部 USB 存储设备插入系统时，iSCSI 引导无法工作。这是 Microsoft 已知的问题。有关详情，请参阅知识库文章：support.microsoft.com/kb/968410。

快擦写存储器

Dell 提供的 VFlash 介质未进行分区，无法支持 iDRAC6 Enterprise 虚拟闪速更新功能。首次使用虚拟闪速更新功能时，系统会提示您使用 iDRAC GUI 格式化介质。

Unified Server Configurator

Red Hat $ ^{\circledR} $ Enterprise Linux $ ^{\circledR} $ 5.3 不能用于 Unified Server Configurator 操作系统部署。

MAC 地址标签

为安全起见，随系统提供的嵌入式 NIC 和 iDRAC6 Enterprise MAC 地址标签在撕下后就不能再粘贴了。

U

注：在 Dell PowerEdge R610 和 PowerEdge R710 系统中，标签位于系统正面的信息面板上。在 PowerEdge T610 系统中，标签位于系统的正面。

Dell $ ^{TM} $ Update Package 信息

在安装 Dell Update Package (DUP) 的过程中，您可能会看到与下列情况相关的消息：

U

注：这些消息仅供参考。

Request for system reboot before the DUP installation is complete （在 DUP 安装完成之前请求系统引导）

• Windows $ ^{®} $ hardware detection (Windows $ ^{®} $硬件检测)

• Windows hardware configuration problem（Windows 硬件配置问题）

• Re-enumeration of VFlash and momentary drive letter changes in Windows (Windows 中