メインコンテンツにスキップ

2017年Appleは13インチMacBook Airに新Broadwell Intl Core i5プロセッサを搭載して登場させました。バッテリー寿命の改善とパフォーマンスがわずかに向上しました。

423回答 すべてを表示

Display "falls back after 100°" is there a fix?

I have a 2017 MB Air A1466 and when the display is opened to around 100° it flops back to its maximum extension, I have checked the hinges and they are not lose at all (I tightened them right up), it must be something with the hinges? Problem is to change them I can only find the left side with the cable and no right hinge replacements. Is there some trick to make them more stiff or am I looking at a whole new top case unit?

Block Image

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

1 件の回答

ベストアンサー

This is a known issue in this series as the hinges have a spring friction that wraps around the hinge pin. But the hinge pin is press fitted into the aluminum lid frame with a key surface which can often break free.

Sadly, you need a new frame which if you can find a junker you could swap out (not easy mind you) or the only other option is to get a new display assembly.

このアンサーは役に立ちましたか?

スコア 1

4 件のコメント:

Yes I thought as much, not the nicest or easiest job to do... here's looking for a junker! Would one new hinge fix it? Or do you know if a 2015 & 2017 share the same screens and connections?

さんによる

Maybe changing just one hinge might make it 'better (The one that includes the cable is easy to buy, the right side without hinge nobody sells as far as I can see)

さんによる

@livfe - Sadly it’s not that simple, give this vid a look MacBook Air Hinge Service. Both hinges have cables running thru.

さんによる

A time consuming fix yes, I did it before to change an LCD inside the assembly :)

さんによる

コメントを追加

回答を追加する

livfe さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 1

今までの合計 66