I'm not sure if I worded the title correctly but I don't know what else to call it specifically. The PSU I have is "rated" (I'm not sure that's the right term for it though) for 200-240V 6A. The only leads I have are either 250V 5A or 250V 10A. Would using either of these cause issues for my PC?
この質問は役に立ちましたか？
評価: 14.9千
26
15
28
In this case, you should use the 250V 10A power cord. You can go the same or up on voltage and amperage.
このアンサーは役に立ちましたか？
評価: 450.9千
11
367
1.4千
Might depend on where you are.
Using the 5A cable might not damage the PSU but may damage the cable or it becomes a fire hazard.
If the local mains power supply is 240V and the PSU is rated for 200-240 6A then a 5A cable is not sufficient. The cable will run hot if the full amount of current is required.
The maximum power that a 240 6A PSU can accept and use is 1440W whereas the 250V 5A cable maximum power rating is 1250W
The PSU may not require this amount but you don't know.
I would use the 10A cable to be safe. Let the fuse in the PSU protect it if necessary and don't use the 5A cable as a fuse.
このアンサーは役に立ちましたか？
過去 24時間: 0
過去 7 日: 1
過去 30 日: 2
今までの合計 41
