修理を始めるには コミュニティ ストア

Canon製プリンターの修理情報です。

431回答 すべてを表示

オプション

ERROR 5B00 for CANON PRINTER PIXMA TS6151?

Printer shows "ERROR B500" and is completly stopped : neither printing, nor scanning.

I tryed to reset copy counter to 0 with Service Tool Canon V3400 and V1074 : it does not work.

Any other advice to soLve this PLANNED OBSOLENSCENCE ?

Thanks

回答がありました！ 回答を表示 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 0
1件のコメント

This question was migrated from https://meta.ifixit.com/Answers.

さんによる

コメントを追加

2件の回答

フィルタ：
参考になった順 新しい順 古い順
ベストアンサー

オプション

That’s the common error for Canon waste ink issues, while others will actually tell you. The problem is unless you have an old old model which can use leaked Canon service tools which can run locally (the newer ones are cloud based or still need to be leaked and cracked) the printer is dead. The cost to do a repair through Canon is as much as a new printer.

このアンサーは役に立ちましたか？

はい いいえ
スコア 1

1件のコメント:

planned obsolescence !

さんによる

コメントを追加

オプション

Long story short, you will have to reset the waste ink counter.

Resetting the waste ink counter:

  1. Unplug all power and USB cables
  2. Open the cartridge door
  3. Hold the power button, and keep holding it while plugging the printer power cable back in
  4. Release the power button once all lights are on.
  5. When the green power light turns off, press the power button quickly two times
  6. The green light will start blinking. Wait for it to stabilize.
  7. Close the cartridge door and print a test document.

Source

このアンサーは役に立ちましたか？

はい いいえ
スコア 0

4 件のコメント:

Sorry. It doesn't work : after step 5, "ERROR B500" comes back.

さんによる

@jplap With tbe cartridge door open?

さんによる

What do you call "cartridge door" ?.

In the TS6151 printer, the ink cartridges are accessible by lifting the upper part of the printer (glass for copying and scanning); that's what I opened.

As nothing works, the cartridges are stuck on the right side of the cart and it is impossible to remove them.

さんによる

Details:

As far as I know, in the case of the 5B00 error of Canon printers, you have to reset the copy counter to 0 to restart the printer.

I carried out this "rescue" on a Canon MX340 printer, 3 or 4 years ago, using a "Service Tool V????" to reset to 0.

But the "Service Tool" (V3400, V1074, ...) found on the net do not work for the TS6151 printer. Need a newer version for this printer.

さんによる

コメントを追加

回答を追加する

Jean Pierre Laporte さん、ありがとうございました！
統計データ:

過去 24時間: 10

過去 7 日: 42

過去 30 日: 165

今までの合計 2,340