メインコンテンツにスキップ

iPhoneの第4代目で、修理はそのままパーツを直接交換するだけです。しかし、正面ガラスとLCDはセットで交換する必要があります。容量はGSM / 8,、16m32 GB / モデル番号 A1332 /本体カラーは黒と白色

2397回答 すべてを表示
締切られた回答

small parts that are appeared suddenly

plz teach me the parts to use and how to constract in iphone4

reference in jp URL:

http://detail.chiebukuro.yahoo.co.jp/qa/...

thx

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0
12 件のコメント

THANKS!but I can't find shiny small part in the picture.

the left one is I understand.

very thx!

さんによる

sorry,I don't know the place of the silver small part and how to put in .

plz teach meeeeeee

さんによる

Here is the shiny part. Look at the shiny part he is prying up on: http://guide-images.ifixit.net/igi/rTWBp...

For the wifi part take a look again at the discussion I referred to:

www.ifixit.com/Answers/View/38247/wi-fi+distance+was+reduced and read the post from Chavdar Sirakov and his pics.

The small part is on top of step 14. iPhone4のディスプレイアセンブリの交換

Maybe this picture will show you how to position it back:

http://www.parts4ipods.com/WebRoot/Store...

The part slides on the contact. I would also use some contact spray on the spot to ensure good contact.

さんによる

sorry,I can see green mark. I think this part to put it on the green mark place.

but I can't understand how to put it on.

plz help me

http://detail.chiebukuro.yahoo.co.jp/qa/...

さんによる

7件以上のコメントを表示

コメントを追加

2件の回答

最も参考になった回答

Your picture is not very clear but here is my guess:

The part on the right is for covering the battery cable contact.

iPhone4のディスプレイアセンブリの交換

- look at step 5. It is under the shiny small part.

The part on the left is very important. Without it you may have terrible wifi.

iPhone4のディスプレイアセンブリの交換

- step 13. It is under the green area. Take a look at this discussion on how to put it back on:

wi-fi distance was reduced

このアンサーは役に立ちましたか?

スコア 4
コメントを追加

The shiny part you will find here. The second step on that page has 2 pictures. There you will find it. I sits on the mute/silence button.

このアンサーは役に立ちましたか?

スコア 3

1件のコメント:

Thanks Jonas. I could not guess to look at other steps since one usually does not touch that button when only changing the LCD. I saw now that the question did not state that he was changing the screen but a general take-apart and assemble question. Sorry tktktktkk, I should have seen that. How is it going with the wifi? I understand this is still an issue?

さんによる

コメントを追加
統計データ:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 7

今までの合計 928