修理を始めるには コミュニティ ストア

2020年5月発売の13インチMacBook ProはクワッドコアIntl 第10世代Core i5/i7プロセッサ搭載でIntl Iris Plus グラフィックス搭載（モデル番号 A2251/EMC 3348、４つのThunderbolt 3ポート）

69回答 すべてを表示

オプション

Backlight working but no image

Good day, my MacBook Pro has a very weird problem when it boots the screen lit up but no image when I connect it to a external monitor it works fine.. one day I power it down and close the lid plug in the external monitor plug in the power cord the Mac turn on I left it there in chrome shell mode for and extended amount of hour when I return I lift the lid, the screen was working fine on then if I close the lid it goes by back to square 1 does anybody knows what’s happening?

この質問に回答する 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

1 件の回答

フィルタ：
参考になった順 新しい順 古い順
最も参考になった回答

オプション

True you do have a wacky issue!

We’ve seen this before in the older MacBook Pro’s. Your system can support an external display via any one of your Thunderbolt ports when you do the signal load is enough for the internal display to work. In the older models we found the logic board MUX logic was messed up. I’m suspecting that’s the case here.

This will need someone with deeper skills to diagnose and replace the bad components the logic board or you’ll need to replace the logic board.

このアンサーは役に立ちましたか？

はい いいえ
スコア 1

3 件のコメント:

Thank you very much….by the way do u know what causes it

さんによる

I'm suspecting a hot ground did you in. You plug in your monitor in a different wall outlet than your system. One of the outlets power wires are reversed (Common & Hot) as the neutral ground line is also tied to common within the breaker power enters in through the wrong side damaging things. I would get a good outlet tester and also check the buildings ground as well.

さんによる

Thank you bro

さんによる

コメントを追加

回答を追加する

Davion Drummond さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 54