This laptop has 16 P2 screws, and they are so tight that they twisted and deformed both P2 bits that I have. I’m now stuck mid-repair with no way to extract these screws.
評価: 480.6千
35
330
971
Yes, the antenna screws can be hard to get out as Apple’s builder Foxconn uses a sealer which makes it hard. I often find a bit of heat can help soften the sealer or I use a solvent.
As far as getting replacement screws, here’s one source: 15"/16" MacBook Pro Screw Set - Antenna: 2mm 0.8mm Pentalobe screws (x16)
If you have iFixit bits I would contact them for replacements iFixit Precision 4 mm Screwdriver Bit
Here’s a dedicated driver: P2 Pentalobe Screwdriver iPhone
Here’s a useful Mini Torque Screwdriver If you think you’re over doing it. I find this offers more control SainSmart ToolPAC ES120 Electric Cordless Smart Gyro Motion-Control Rechargeable Screwdriver Kit, Repair Tools for Small Devices
このアンサーは役に立ちましたか？
I also had this same issue with the exact same MacBook. I’m stuck mid-repair because a P2 bit broke off in a tiny screw that’s too tight. Now I can’t get another bit into the screw and the MacBook is still broken. How do I extract the P2 bit tip that is stuck in the screw?
このアンサーは役に立ちましたか？
過去 24時間: 0
過去 7 日: 1
過去 30 日: 6
今までの合計 372
