メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

2017年9月に発売されました。モデル番号はA1863、A1905。GSM もしくはCDMA/容量は64か256GB/ゴールド、シルバーとスペースグレイ

606の回答 すべてを表示

Wite spots on iPhone screen after screen replacement?

Hello.

I have just done a screen replacement on an iPhone 8 but afterwards, there are some white marks on the screen as shown in the photos above. Where did these marks come from and how do I get rid of them?

You will be able to see the images of the marks below

Thanks

Block Image

Block Image

Block Image

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 2

コメント:

Did You put pressure on the screen

さんによる

コメントを追加

1 件の回答

選択されたソリューション

This could mean that something isn’t assembled correctly inside of the phone and is pressing against your display panel. You can easily test this by opening the phone again and to not press it into the case. If you still see white dots it probably means that your display got damaged during installation or that it was damaged before installation.

I noticed something similar on an iPhone 7 Plus I worked on where the display flex cable was not correctly routed under the shield of the screen, causing some pressure on the screen resulting in similar white dots when touching on the display. Take a look at the screen replacement guide as of step 34 to double check your cable is routed properly. I’m saying this because the white spots in your pictures happen to match the placement of the ribbon cables.

Did you test the screen before fully assembling the phone again?

この回答は役に立ちましたか?

スコア 1

コメント:

I agree with u

さんによる

I fixed it. It was because there was a screw missing from the display where the small silver chipset for the screen goes. I managed to get another screw and screw the metal back plate fully onto the display so it all works now.

Thanks for the help

さんによる

@eisah Awesome! Glad it was something small like that ;-) don't forget to mark this answer as the solution then.

さんによる

コメントを追加

回答を追加する

Eisah Sharif さん、ありがとうございました!
統計データを表示:

過去 24時間: 1

過去 7 日: 2

過去 30 日: 5

今までの合計 47