メインコンテンツにスキップ

モデル番号A1312 / Mid 2010 / 3.2 GHz Core i3もしくは2.8 & 3.6 GHz Core i5もしくは2.93 GHz Core i7, ID iMac11,3

382回答 すべてを表示

Screen completely dark, external monitor works

I got this iMac used, the previous owner told me the connector to display on motherboard had broken off. I had the connector replaced by a professional repair shop, but the screen still won’t turn on. Not just backlight, the screen is completely off, not even showing in system information. (I tried to shine a flashlight into it, nothing)

If I hook it up to an external monitor, it works as the only display device, so I think the video card is fine..

Now what could be the problem? assuming the connector and display cable are working correctly (I tested every pin with multimeter)

LCD itself? Display power board?

I’d appreciate some expert opinions, thanks!

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

2件の回答

Hi

It seems, backlight is not working.

このアンサーは役に立ちましたか?

スコア 0

1件のコメント:

If it's only the backlight, shouldn't the screen be detected in system information as a display device? As in, my external monitor should be an extended desktop, instead of the only desktop.

さんによる

コメントを追加

What is the tech telling you? Did you or he take any pictures of the damage? If you have pics lets see them iFixitでの質問に画像を追加する方法

I’m suspecting he didn’t properly install the connector and/or there was more damage where the solder pads got pulled off so there is no electrical connection to the deeper circuits beyond the solder point on the main logic board.

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

John Zheng さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 55