メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

2.0GHz, 2.3GHzもしくは2.6GHzクアッドコアIntel Core i7プロセッサ (Turbo Boost 最大3.8GHz) 6MB共有L3 キャッシュ付き。

510回答 すべてを表示

My MacBook Pro screen flickers and glitches. (Images)

It’s been doing this for a week. It always show resolution issues, pixel tear and horizontal line glitches during startup. Sometimes it stops after a few minutes, and I can squeeze some work time in. Other times it doesn’t stop and I need to leave it shut down.

Can someone give me a possible diagnosis or assistance before I have to go give 600$ for repairing something 1/10 that price. IFIXIT suggests these might be unrepairable ourselves.

It’s horrible. Help!

Edit 1: Never dropped. Minor dings and dents due to usage exist. Movement of display or body does not affect the appearing or disappearing of the glitches whatsoever.

Edit 2: Pairs perfectly with an external display via HDMI, when not glitching. (Image)

Block Image

Block Image

Block Image

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 5
コメントを追加

6件の回答

最も参考になった回答

Does the screen start glitching like that immediately when you turn it on or only after a certain point on the loading bar?

This looks to me like physical damage to the display, was it dropped or anything? You will most likely just need to replace that. You can do it yourself fairly easily but the part itself is typically well over $500, so it does end up being an expensive repair no matter where you go. MacBook Pro 15" Retina (Late 2013-Mid 2014) Display Assembly

Another thing that occurs to me is it could be the LCD cable that is damaged somehow. You could try replacing that instead (Part: MacBook Pro Retina (2012-2015) Display LVDS Cable): MacBook Pro 13" Retina Display Early 2013 LCD Cable Replacement — It’s a bit of a long-shot but it’s definitely a far cheaper repair so I would try it.

MacBook Pro 15" Retina (Late 2013-Mid 2014) Display Assemblyの画像

製品

MacBook Pro 15" Retina (Late 2013-Mid 2014) Display Assembly

$549.99

MacBook Pro Retina (2012-2015) Display LVDS Cableの画像

製品

MacBook Pro Retina (2012-2015) Display LVDS Cable

$14.99

このアンサーは役に立ちましたか?

スコア 3

コメント:

Starts glitching immediately on boot. But once it calms down (most times after a few minutes), it works FLAWLESSLY for hours. Then a sleep or a shut down and it starts going mad again. If I'm unlucky, it won't stop glitching till I shut it down come back to it after a few hours.

Never dropped it, but it does have bumps on the edges due to the backpack hitting edges of walls or doors over the years.

Thank you for replying so quickly!

さんによる

Is the glitching affected when you put pressure on the display or when you open and close the display? If so it's definitely going to be physical damage.

If you're lucky it could be the LCD cable, I'll update my answer with info on that.

さんによる

@jonaharagon The glitching seems to have no relation to the movement of or pressure on the display or the device.

さんによる

@sushmeit I would definitely give the cable a try first if the screen works sometimes, especially since there's no visible cracks on the LCD and moving it doesn't affect anything. You might get lucky. No liquid damage that you know of, or any corrosion around the LCD connector?

It being a GPU problem on the other hand is highly, highly unlikely, but we can rule that out for sure quick. Could you attach an external monitor/TV and see if it's glitching at all? If it doesn't glitch on another monitor then the problem is either going to be the display, the display cable, or the display connector on the logic board.

さんによる

@jonaharagon No liquid damage that I can remember. Works fine with an external display. I've included an image above.

さんによる

6件以上のコメントを表示

コメントを追加

your display is defective, replace it

このアンサーは役に立ちましたか?

スコア 1
コメントを追加

My display started doing the same, but when i connect and external monitor via HDMI or Thunderbolt both screens work perfectly , the other fun thing is that if i run the machine on windows or linux it works perfectly , so i think is not the screen nor the cable, one technician told me it was something with the hertz , the frequency the screen is working with macOS , change the refresh ratio but, change it to the same that wndows or linux uses with this screen , the thing is that i have tried many ways to do it with not success and im stock with the problem still.

I hope someone knows how to fix it , thank you

このアンサーは役に立ちましたか?

スコア 0

コメント:

Exactly the same issue I have. Have you solved it? It’s a very strange issue. Works fine and when connected to a display.. if there is movement on the displayed content it is fine. But if the image becomes static, the issue returns

さんによる

コメントを追加

we’re all doomed. :(

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

Hello guys


I am with the same issue.

MacBook Pro (Retina, 15-inch, Early 2013) Mojave 10.14.6 (18G1012)


This started after I opened it to change the battery to a new one, last week.

I'm starting to think that I screwed up.


Pressing the screen works, somethimes.

Other times, it's on for hours without any problems.


Send it to Apple repair is the only way?

++


このアンサーは役に立ちましたか?

スコア 0

コメント:

same thing here! started after battery change.. did you fix it?

さんによる

Me too after battery swap. Anyone work this out?

さんによる

コメントを追加

I have similar problem. It looks like whenever the laptop goes to sleep or turned off it will go crazy for a few minutes, then goes back working normally until next sleep or shutdown. Then I realized that it was not because the machine goes to sleep or turned off, it was because the display being turned off. Conversely, if the display is never turned off, that problem will never happen. So what I did was simply have the energy setting to never turn off display and just set the brightness to zero when I do not use it. This seems does not the lifespan of the display.

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Sushmeit Madhavan さん、ありがとうございました!
統計データを表示:

過去 24時間: 8

過去 7 日: 66

過去 30 日: 279

今までの合計 12,020