修理を始めるには コミュニティ ストア

大きめのアップルMacBook Airラップトップはデュアルマイクと802.11ac Wi-Fi接続を特徴としています。

465回答 すべてを表示

オプション

3M adhesive tape for LCD replacement

I have watched many youtube videos with LCD matrix replacement. All of them are using 3M adhesive tape to attach LCD to aluminium body and to attach aluminium frame at the end of the replacement procedure.

But there are hundreds of different models of 3M tape. They are different in thickness and strength (VHB models seems to be better and more expensive). Could you please tell me which ones can be used and which ones cannot be used for the procedure?

I want to buy 3M F9473PC VHB. Is it good enough?

この質問に回答する 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 2
1件のコメント

Good source for the tape 3M - VHB F9473PC

さんによる

コメントを追加

1 件の回答

フィルタ：
参考になった順 新しい順 古い順
最も参考になった回答

オプション

One of the issues you face when replacing the tape’s is going to far! Yes, you want something that’s strong so the glass doesn’t fall off. But you also don’t want it so strong you need a jackhammer to get the glass off in a future repair.

So… replace the tape in the same locations and size, don’t over apply and use the correct adhesion grade tape.

iFixit offers Tesa 61395 tape which is what Apple uses. If you are only doing one system this might be a cheaper option Precut Adhesive card

You’ll want to use a Heat Gun to soften to old tape and use Jimmy, iFixit Opening Picks (Set of 6) & Suction Handle.

For a reference here’s what you’ll be facing MacBook Pro Retina Display Teardown

Frankly, I‘ve given up trying to replace the LCD panels. It takes a lot of skill to get the glass out without damaging the bezel frame and the rubber gasket. Then you still have to fight through the dust on the glass surfaces and not damaging the polarizer & defuser sheets.

Here is one source for the full assembly MacBook Air 13" (Mid 2013-2017) Display Assembly

Heat Gunの画像

製品

Heat Gun

$24.99

iFixit Opening Picks (Set of 6)の画像

製品

iFixit Opening Picks (Set of 6)

$4.99

Jimmyの画像

製品

Jimmy

$7.95

Suction Handleの画像

製品

Suction Handle

$2.99

MacBook Air 13" (Mid 2013-2017) Display Assemblyの画像

製品

MacBook Air 13" (Mid 2013-2017) Display Assembly

$314.99

Tesa 61395 Tapeの画像

製品

Tesa 61395 Tape

$5.99

このアンサーは役に立ちましたか？

はい いいえ
スコア 1

4 件のコメント:

"It takes a lot of skill to get the glass out without damaging the bezel frame and the rubber gasket. "

As far as I know, the problem could be solved by using heater plates. 7 ' ' inch plate for iPhone is very cheap. But can I use it with 13 ' ' inch screen of my MacBook?

Could you please tell me - the new LCD matrix usually contain adhesive tape on its edges or it does not?

さんによる

The process you use on a iPhone does not apply here. You can't use a heater plate. You need a heat gun.

The discreet LCD panel you buy may have the tapes most don't. To be clear I don't go that far in the Air's or Retina models (they are constructed in the same way)

I replace the entire display lid assembly as its just a better repair. Consider your time, skills and risks if the repair fails.

I posted Youtube vid in your other question so you can see how thin the panel is.

This is not an easy repair for someone only doing a few a year.

さんによる

@danj "iFixit offers Tesa 61395 tape which is what Apple uses. If you are only doing one system this might be a cheaper option Precut Adhesive card"

Great! iFixit offers 1mm 2mm 4mm and 8mm models. Which of them should be use to attach the black LCD matrix to the aluminium case?

さんによる

I would get a few cards

さんによる

コメントを追加

回答を追加する

Misha Krasnorutsky さん、ありがとうございました！
統計データ:

過去 24時間: 1

過去 7 日: 5

過去 30 日: 17

今までの合計 3,551