メインコンテンツにスキップ

対象のモデルはA1419 / EMC 2806 / Late 2014 または Mid 2015。 3.3 または 3.5GHz Core i5 または 4.0GHz Core i7 (機種ID iMac15,1)、EMC 2834 late 2015 / 3.3 または 3.5 GHz Core i5 または 4.0 GHz Core i7 (機種ID iMac17,1)のRetina 5Kディスプレイを搭載したすべて。

573回答 すべてを表示

Run Windows on secondary internal drive

Hello,

I’d like to install Windows on my iMac.

I have dual drive setup a PCIe connected SSD as Start-Up Disk (500 GB) and SATA connected HDD for storage needs.

I’m using Boot Camp to install Windows and it asking me which disk to install it on.

I’d like to install it in SATA connected HDD as it has more space (1TB), and also I do not want to put more load on the SSD.

However I worry that there would be problems as Windows wouldn’t be in the same Start-Up Disk as MacOS. Has anyone done this before? How should I proceed?

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

1 件の回答

ベストアンサー

The last time I setup BootCamp it needed to be installed on the boot drive. So if your SSD is your MacOS boot drive then it would need to be on it. But your applications and your Windows data could be located on a second drive. Depending on what you are running here you may just want to move your Mac data to your HDD and leave the SSD as your OS & Apps volume, leaving the rest of the drive empty (at least 1/4 of it) That way your system has space for virtual RAM, Caching & Page files and depending on the apps scratch space.

このアンサーは役に立ちましたか?

スコア 1
コメントを追加

回答を追加する

Alican さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 45