解決済み: Detects internal speaker in System Preferences but no sound - Mac Pro Late 2013

Detects internal speaker in System Preferences but no sound

No boot sound and no sound when in OS (10.14.3). System Preferences shows that the internal speaker is there. I can plug in headphones and the output source changes to headphones and sound does play through them. I've replaced the speaker, I/O Board, and cable that connects I/O Board to logic board. I've tried resetting SMC and PRAM. I've booted to a live Linux USB and sound doesn't work there either. I've run out of ideas besides replacing Logic board and/or CPU riser board. Thanks for the help.

回答がありました！ 回答を表示同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 0

2 件のコメント

What does the Sound control panel show as far as Output?

Dan さんによる2019年4月16日

Internal Speakers

undrgrndneo さんによる2019年4月16日

投稿日: 2019年4月16日

オプション

Did you replace the Port board? It has the DAC chip (Cirrus) on the same side as the speaker. I’m suspecting the one of the trace lines going to it from the speaker is your problem. Check the solder joints on the chip and the surrounding area. Trace the speaker connection to the DAC

このアンサーは役に立ちましたか？

はいいいえ

スコア 2

2 件のコメント:

By port board do you mean the board the speaker plugs into? If so then yes it's been replaced. I could look at the DAC chip I suppose but I don't have a reflow station if that is the issue.

undrgrndneo さんによる2019年4月16日

Yes, the speaker ties to the DAC so either the connection at the speaker or the solder joints on the DAC and the SMD around it had an issue.

Also you might want to double check the speaker I think its a 4 Ohm unit.

Dan さんによる2019年4月16日

コメントを追加

Mac Pro Late 2013

Detects internal speaker in System Preferences but no sound

1 件の回答

回答を追加する