メインコンテンツにスキップ

2012年6月12日に発売。Turbo Boost付きのインテルプロセッサー、モデル番号は A1278。

1281の回答 すべてを表示

Is there a home remedy to fix 3 broken ram slot holders?

I had bought my brother (who is 18) some new ram for his birthday since he had been asking for 16 GB. Well I had told him not to replace the RAM and well, he did and failed spectacularly!! (How can an 18 year old fail to install ram but yet me being a 16 year old not??) He managed to not only break one of the tabs holding the ram but 3!!!!!!

He broke the right side top slot and both of the bottom tabs, right now I created a rig where we used some old credit cards and super glued them together and created a temporary holder.

My question is, is there anywhere to create another type of rig where I can use both slots or is my brother forever stuck running single channel memory unless we buy a new logic board?

I do not have the funds (of course) to buy a new logic board for him or to get someone who can salder and desalder. Any home remedies would be a blessing, thank you!

Ciao

Update (01/10/2019)

Block Image

Block Image

Block Image

Block Image

Sorry for the latest response, I’ve been drowning in homework for the past few days.

here are the photos and the current rig we set up.

Thank you again!

Ciao

Update (01/13/2019)

Block Image

Block Image

Block Image

Block Image

the images didn’t pop up in the other comment.

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0

コメント:

Can we get pictures of how you have this rigged please?

による

コメントを追加

Android 修理キット

A new screen or battery is one kit away.

ショップを見る

Android 修理キット

A new screen or battery is one kit away.

ショップを見る

2回答

I think it would be extremely difficult for a person to replace these with standard soldering tools. I think you would need some very specialized equipment to pull that off. I also think it’s going to be costly to have a pro do it.

If the metal conductors are still there on the three broken sockets you should be able to try a rig something up that will hold the ram in place. If the metal conductors are not there and have been ripped off the board then you are probably not going to be able to repair those.

I would think the best way to repair would be to see if there are any available on Ebay or some other place that sells used boards.

Post some pic’s, of your rig and the damage that was done. the community might have some idea

この回答は役に立ちましたか?

スコア 0

コメント:

Dang sorry for the later than usual response (homework for classes has been a nightmare :/) the pins are still connected and the computer does function and will run. I’ll check eBay in my free time, it’s currently 1am where I live so I’ll get those photos to you guys when I have time. Thank you all for the help so far!

Ciao!

による

コメントを追加

well on the positive side it looks like all the connectors are intact so really what you need to do is figure out a way to keep the ram dimms in place. I think what I would do is install the bottom ram dimm and then put something like a rubber band that has been cut in half so there is a buffer between the bottom and top ram dimm and then install the top ram dimm so that when its in place it puts enough presure on the bottom dimm so that the bottom ram dimm stays in place.

Than I would make a plastic strap that holds the top ram dimm in place. it looks like you have a screw on each side of the dimm that you might be able to use to hold the plastic strap in place. Let us know what you come up with.

この回答は役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Johnny Luna さん、ありがとうございました!
統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 5

今までの合計 95