The DualShock 4 CUH-ZCT2 was announced in 2016 to replace the CUH-ZCT1 controller released in 2013. This controller is similar to the previous model.

30の回答 すべて表示

How does the gyroscope work?

When I reassembled it I accidentally tore off one of the two wires from the left vibrator (with 3 blades). Since I don’t have any soldering tools I decided to assemble it all the way to test if I managed to fix it (the left joystick was dragging left). Besides the fact that only the right vibrator (with 1 blade) works, gyroscope typing also stopped working. I was wondering if it’s using the vibrator or if I broke something else. Otherwise works just fine.

回答がありました! View the answer 同じ問題があります


スコア 0



Hi Jq,

The wire you broke on the vibrator supplies power (red) or ground (black) and is not related to gyroscope capability. The gyroscope is probably on the circuit board as a chip somewhere. You can try to check if all the cables within the controller are well seated in their sockets.


スコア 2


thanks! btw. Is it safe to use if only the red cable is disconnected or should I disconnect the other one first?


The red cable usually supplies power. As long as the wire is broken in a way that the metal core isn't exposed, it should be alright. You can just snip it with scissors.

Note: This applies in this specific situation only. Do not assume the same for any other repair situations!




Jq Bt さん、ありがとうございました!

過去 24時間: 0

過去 7 日: 0

過去 30 日: 2

今までの合計 29