評価: 13
1
1
My dishwasher is only about a year and a half old. We had a bad storm yesterday...my power surged and then the e2 f2 code started flashing. Did the reset, took the door off and checked connections...still flashing. Do I randomly start buying parts? How do I check to see if it’s something I can fix? I am handy, but appliances are new territory for me. All info. is appreciated.
評価: 685.3千
3.4千
1.1千
2.6千
The e2 f2 error usually means main control board is not getting correct signal from the user interface. Turn off power/breaker, remove screws holding inner door liner, remove liner and check/secure/clean all wire connections from front interface and main control board. The number you gave me an oven, please check it for accuracy.
このアンサーは役に立ちましたか？
評価: 4.1千
3
2
In cases like this, the control module has been effected. This can be as simple as an open internal fuse or more complicated like a smoked controller IC. In either case, knowing the exact make and model is critical. Please update this with the make and model. Also, a Google search of the model number and the keyword “parts” should get you to a site to check for parts availability. If you can post a picture of the control module, we may be able to see a damaged part that can be replaced as a start.
Dan
このアンサーは役に立ちましたか？
Thank you. I’m adding a comment below with some pics.
過去 24時間: 2
過去 7 日: 5
過去 30 日: 44
今までの合計 3,238
2 件のコメント
We have the same model and issue, did you come up with a solution
Clay showalter さんによる
I have the same model and same problem. Did you get it fixed?
Rabin Shrestha さんによる