メインコンテンツにスキップ

2.26 or 2.4 GHz / White plastic unibody enclosure

645回答 すべてを表示

The sleep indicator light turns on when power is pressed

The sleep indicator light is solid when you press the power button, the machine restarts automatically, then the sleep light flashes once, the machine has no display, the display doesn’t turn on, it does this with ram, without ram, with battery and without a battery, any help appreciated

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
1件のコメント

I think it’s the MagSafe board, duh, the battery doesn’t charge and the light stays green, that might make sense

さんによる

コメントを追加

3件の回答

ベストアンサー

I went ahead and replaced the logic board and the machine definitely works with no issues now

このアンサーは役に立ちましたか?

スコア 0
コメントを追加
最も参考になった回答

Way to much guessing going on here. First thing to do is verify what machine you actually have and we can see what the know issues are. The model you have listed did not have the nVidia GPU issue. Go to this link and insert your serial number and report back what you have. Next do you have any history on this machine?

Do you have another Mac or another mag-safe adapter?

https://everymac.com/ultimate-mac-lookup...

このアンサーは役に立ちましたか?

スコア 2

1件のコメント:

I have both another MagSafe adapter and another Mac, the charger is fine, it is the late 2009 unibody model MC207LL/A, and as for the history, it has never been in contact with water however it has been dropped a couple times but remained functional afterwards

さんによる

コメントを追加

This might very well be a problem with the MagSafe DC in board. I suggest replacing it.MacBook Unibody Model A1342 MagSafe Board Replacement

MacBook Unibody (A1342) MagSafe DC-In Board

Update (10/10/2018)

@coreycusick It appears that getting a new Logic Board would be a good idea. iFixit sells the Logic Board you will need for this Mac for about 100 USD. Very reasonable!

MacBook Unibody (A1342) 2.26 GHz Logic Board

MacBook Unibody Model A1342 Logic Board Replacement

MacBook Unibody (A1342) 2.26 GHz Logic Boardの画像

製品

MacBook Unibody (A1342) 2.26 GHz Logic Board

$29.99

MacBook Unibody (A1342) MagSafe DC-In Boardの画像

製品

MacBook Unibody (A1342) MagSafe DC-In Board

$19.99

MacBook Unibody Model A1342 Logic Boardの画像

ガイド

MacBook Unibody Model A1342 Logic Board Replacement

難易度:

難しい

40 minutes - 2 hours

MacBook Unibody Model A1342 MagSafe Boardの画像

ガイド

MacBook Unibody Model A1342 MagSafe Board Replacement

難易度:

中レベル

10 - 30 minutes

このアンサーは役に立ちましたか?

スコア 0

6 件のコメント:

Yeah I don’t know why that didn’t click, I already have another MagSafe board I will try and will go from there. I’ll post later to see if the issue is resolved

さんによる

@coreycusick Sounds like a plan!

さんによる

It appears to be a logic board issue, dang it

さんによる

@coreycusick Phooey! Maybe @danj @mayer knows os some other troubleshooting before we conclude it to the Logic Board.

さんによる

Yeah, I can only assume it’s the logic board or a power issue, just because of what the MacBook does, normally I don’t have this much trouble as I have fixed far worse than this, but I’ve never owned this model until a couple days ago and this particular issue seems to be a faulty NVIDIA GPU

さんによる

1以上のコメントを表示

コメントを追加

回答を追加する

Corey Cusick さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 5

今までの合計 400