Replacing Hard Drive for Erly 2011 MacBook Pro with SSD

Question

MacBook Pro 13インチ Unibody Early 2011

2011年初期のモデル。モデル番号はA1278 / 2.3 GHz i5 or 2.7 GHz i7 プロセッサー。

782回答すべてを表示

Glen Shanahan @glenshanahan

評価: 1

投稿日: 2018年8月24日

オプション

Replacing Hard Drive for Erly 2011 MacBook Pro with SSD

Hi,

I am trying to replace the Hard Drive on my Early 2011 MacBook Pro with a Samsung 860 EVO SSD. I have followed the guide and know that the new SSD is working as I have removed the original Hard Drive and the computer works using the SSD through USB.

I bought the 2012 SATA cable. But when I turned my computer on I still got the question mark in the folder error.

However I think I may have damaged the new SATA cable when I was installing it. I have included a picture of the cable and would be obliged if someone with more expertise than me could let me know if I have indeed damaged the cable or perhaps suggest where I am going wrong.

Thanks,

Glen.

Sorry images didn’t post

この質問に回答する同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 0

4 件のコメント

I see a few small dents and the remains of the adhesive. What within the limited view here do you think is damaged?

Dan さんによる2018年8月24日

Hi Dan,

thank you you for your quick reply. I did what you said and it brought me to internet recovery. It is just stuck on the screen in the photo below.

[image|1528497]

I think the cable may be damaged in the highlighted section. It looks to be broke and I can see what look like copper wires on either side of the break.

[image|1528499]

Thanks,

Glen.

Glen Shanahan さんによる2018年8月24日

Ah! Yes the cable got folded hard and the shield foil got damaged and the inner wires likely got damaged too. Ouch! New cable time.

Dan さんによる2018年8月24日

D’oh. Thanks for your help Dan.

Glen Shanahan さんによる2018年8月24日

コメントを追加

1 件の回答

I see a few small dents and the remains of the adhesive. What within the limited view here do you think is damaged? — Dan
Hi Dan,

thank you you for your quick reply. I did what you said and it brought me to internet recovery. It is just stuck on the screen in the photo below.

[image|1528497]

I think the cable may be damaged in the highlighted section. It looks to be broke and I can see what look like copper wires on either side of the break.

[image|1528499]

Thanks,

Glen. — Glen Shanahan
Ah! Yes the cable got folded hard and the shield foil got damaged and the inner wires likely got damaged too. Ouch! New cable time. — Dan

Dan @danj 評価: 480千 Self employed contract worker 35 329 971 · Answer 1 · 2018-08-24T05:07:52-07:00

最も参考になった回答

Dan @danj

評価: 480千

Self employed contract worker

35

329

971

投稿日: 2018年8月24日

オプション

Put the cable back in with the drive connected. Now this time restart the system and hold the Option Key to set to the Startup Disk manager. Do you see the SSD at this point? If you do select it and the system should boot up. If that indeed works you’ll need to go into the system preferences setting and alter the Startup Disk setting within it.

I do recommend you apply a strip of electricians tape on the uppercase where the cable crosses over as the rough aluminum surface can damage the cable over time. Also don’t bent the folds! You want arcs not sharp corners. The foil wires inside are fragile! Bending them too much can damage them.

このアンサーは役に立ちましたか？

はいいいえ

スコア 2

コメントを追加

MacBook Pro 13インチ Unibody Early 2011

Replacing Hard Drive for Erly 2011 MacBook Pro with SSD

Update (08/24/2018)

1 件の回答

回答を追加する