Toggling Silent/mute switch doesn't work. Then mutes/unmutes by itself

Question

iPhone 6s

2015年9月25日にAppleから発売されたiPhone 6Sの修理情報とガイドです。モデル A1688、A1633。

2690回答すべてを表示

Adam Comis @amcdc

評価: 1

投稿日: 2018年4月12日

オプション

Toggling Silent/mute switch doesn't work. Then mutes/unmutes by itself

My iphone 6s mute/silent switch doesnt respond correctly when I toggle it. Switch seems to be working fine mechanically (been cleaned as much as possible from the outside).

Further, the mute/silent function changes on its own. Sometimes ever couple seconds (even though switch not moving).

Seems the audio/power cable (and bracket) need to be replaced. Does the button also need to be replaced? Anyway I can open it up and the solution will be simpler?

回答がありました！ 回答を表示同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 0

コメントを追加

1 件の回答

ベストアンサー

Minho @refectio

評価: 221.4千

15

289

807

投稿日: 2018年4月12日

オプション

It definitely sounds like the button on the flex is damaged. You can change this yourself.

This is not the simplest DIY repair so if you're all thumbs, I wouldn't recommend it as a lot can go wrong here. If you're a good fixer in general and have a delicate touch, you should certainly try it. The repair guide is here.

このアンサーは役に立ちましたか？

はいいいえ

スコア 5

5 件のコメント:

YES! I saw that. Thank you. So I dont have to replace the mechanical switch? Just the cable and bracket?

Adam Comis さんによる2018年4月12日

The physical actuator is on the flex. The button you push only pushes itself against the actuator.

Minho さんによる2018年4月12日

I understand. Is it possible there is just a poor connection/dirt between the actuator and the button? Or does the flex definitely need replacing?

Adam Comis さんによる2018年4月12日

It's possible, sometimes it can get out of alignment. You'll have to open it up and take a closer look.

Minho さんによる2018年4月12日

When I order the volume button cables I usually make sure it comes with the metal bracket and the vibrate switch attached with the metal bracket too.

What generally happens is that the plastic 4 holes gets loose from the metal bracket for the switch making it hard to switch or getting stuck in a certain position.

A worn out switch or teared ribbon cable may cause the vibrate switch to go on and off randomly.

Ben さんによる2018年4月13日

コメントを追加

YES! I saw that. Thank you. So I dont have to replace the mechanical switch? Just the cable and bracket? — Adam Comis
The physical actuator is on the flex. The button you push only pushes itself against the actuator. — Minho
I understand. Is it possible there is just a poor connection/dirt between the actuator and the button? Or does the flex definitely need replacing? — Adam Comis
It's possible, sometimes it can get out of alignment. You'll have to open it up and take a closer look. — Minho
When I order the volume button cables I usually make sure it comes with the metal bracket and the vibrate switch attached with the metal bracket too.

What generally happens is that the plastic 4 holes gets loose from the metal bracket for the switch making it hard to switch or getting stuck in a certain position.

A worn out switch or teared ribbon cable may cause the vibrate switch to go on and off randomly. — Ben

iPhone 6s

Toggling Silent/mute switch doesn't work. Then mutes/unmutes by itself

1 件の回答

回答を追加する