修理を始めるには コミュニティ ストア

2019年3月に発売。Mac Pro (Early 2009)は、IntelのNehalemアーキテクチャをAppleのプロフェッショナルデスクトップラインに搭載し、2010と2012のCPUアップデートを加えて、インテリアが再設計されたモデルです。

201回答 すべてを表示

オプション

3 Ram Slots not working after 5,1 upgrade and processor install

Mar 31, 2018

Maybe you can help. I did this upgrade on MacPro 4, 1-Did the firmware upgrade to 5,1. Completed the hardware install as listed above with 3.33 ghz processor. Started it up and only one of the Ram in working. Red LEDS on next to the back 3 ram slots. Switched around the Ram (although they are all the same for both the 4,1 & 5,1 models) to no avail. So I have only the #1 Ram slot working. Did the Pram reset a number of times. Did I screw up the board plane? Is that possible? I was extremely careful. Any thoughts on this would be appreciated.

この質問に回答する 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 0

2 件のコメント:

Any ideas @mayer ??

さんによる

How did you do the EFI update? With what software? What was the operating system you were using and did you upgrade it? Exact what year model do you have and what processors are you running?

さんによる

コメントを追加

1 件の回答

フィルタ：
参考になった順 新しい順 古い順

オプション

The EFI update went fine. Did the SIP disable in El Capitan in a Mac Pro 4,1-

Result 5,1. Fine.

Figured out the cause. One of the very, very tiny pins for some reason got bent on the periphery of the center of the CPU (on the processor tray). I was very careful- So I can not for the life of me figure out how this happened. After attempting to straighten the pin and booting up I got only 1 RAM slot not working. 3 is much better than 1 working. I took it apart about 4 times and I got the same result.

They are very fragile and so small- I needed a jeweler's loupe to do the job.

I didn't want to chance it another time.

It being a back up Mac Pro- I'm accepting this problem. Bought more RAM - so I making up for the lost slot.

Thanks for your answer.

このアンサーは役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

回答を追加する

Paolo Alberto さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 852