修理を始めるには コミュニティ ストア

モデル番号A1297 Unibody: Early 2009, Mid 2009, Mid 2010, Early 2011 & Late 2011

544回答 すべてを表示

オプション

820-2610-A : U7870 missing on my motherboard? Schematic is weird

Hello world,

I am looking to understand the schematic here:

I recently soldered the very known c7771 capacitor for bad voltage and now i see that on the exact other side of the board i have no U7871, but on the schematic it is written

"U7871 IS TO REPLACE U7870" on page 67;

but on openboardview it seems like there is a component.

Does somebody know if there is a component here or not?

Thanks a lot

Link to 820-261-a openboardview and scheme:

http://www.mediafire.com/file/mao99ejro8...

https://github.com/OpenBoardView/OpenBoa...

回答がありました！ 回答を表示 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 0
1件のコメント

Thanks lot guys

さんによる

コメントを追加

2件の回答

フィルタ：
参考になった順 新しい順 古い順
ベストアンサー

オプション

@yanndetrie U7871 is an Omit. This means that it is not on the board. This cold be because of later developments of the circuitry etc. which may have made it obsolete or it can be used for further development in the future. At the time your board was developed is was no longer used. So it is okay to omit this :-)

このアンサーは役に立ちましたか？

はい いいえ
スコア 2
コメントを追加
最も参考になった回答

オプション

Unfortunately I don't have a board like yours to check about your apparently missing component, but I can say that schematics are not perfect, sometimes they have misplaced parts or wrong values or they seem like incomplete drafts. Some schematics, like some of iphones are clearly wrong when you compare them with the real world boards. Therefore, if it seems there's no missing component as you don't see any empty room with a clearly pulled IC , it's probably just like that, irrespective what the schematic says.

このアンサーは役に立ちましたか？

はい いいえ
スコア 3
コメントを追加

回答を追加する

yanndetrie さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 4

今までの合計 751