評価: 21
1
So I have recently repaired my Iphone 6s with a new screen. before the repair the home button was working but the touch ID wasn't. I have now replaced the screen but the home button wont respond.
I have changed the screen again as I thought it may be an issue with the long extension flex but even after replacing the screen once more the button still isn't working and I have also tried a new home button also.
Any suggestions would be appreciated please??
評価: 127
7
3
so you have tried a new home button and a new home button flex cable? You may have damaged the home button connector on the logic board, did you try cleaning the connector? Also inspect the connector magnified. Look for any damaged prongs or dirt etc in there...I'm assuming you did unplug your battery before reconnecting the screen and home button flex cables onto the board right ?
このアンサーは役に立ちましたか？
I have tried a new home button with a flex cable and the new screen and yes the battery was disconnected before going ahead with the repair. I will take a look this afternoon. Thanks for the advice.
過去 24時間: 0
過去 7 日: 0
過去 30 日: 0
今までの合計 47
