修理を始めるには コミュニティ ストア

モデル番号A1286、発売日 2011年2月/2.0, 2.2もしくは2.3 GHzクアッドコアIntel Core i7プロセッサ

586回答 すべてを表示

オプション

How can I effectively reattach the front glass

I got this MacBook Pro used, and it had a replacement glass and bezel (totally unmentioned in the ad) and the glass fell off within a day or two. I kept sticking it back on and eventually broke it. I got a replacement glass with tape on it, and that fell off within a day or two. I got a replacement from the vendor which was even worse... tape was obviously old and the backing was already peeling off in places. It falls off every time I open the lid. Has anyone found an adhesive that works?

回答がありました！ 回答を表示 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

2件の回答

フィルタ：
参考になった順 新しい順 古い順
ベストアンサー

オプション

Here's a good reference on how the glass is attached: MacBook Pro 15" Unibody Late 2008 and Early 2009 Front Display Glass Replacement.

Basically, the adhesive is heat activated, while it does have a little tack it's only after its heated does it really grab. I've used a glue gun to back fill the adhesive when the original adhesive is worn out. Whats important even using a glue gun is the glass and frame need to be warm so you have time enough to press the glass on. If you don't the bead of glue will prevent the glass to sit cleanly on the frame. 3M also makes a nice double sided tape that also works.

このアンサーは役に立ちましたか？

はい いいえ
スコア 1

2 件のコメント:

Well, I did heat and press this third glass quite a bit on installation, so I continue to think the tape it came with was inadequate. I'd be interested in a more specific reference (name/number?) of a tape anyone has found to work

さんによる

Did you use a heat gun?

さんによる

コメントを追加

オプション

3m 300lse should do the job! ;-)

A silicone based glue can also be recommended (it is easy to rub away excess glue after hardening)

このアンサーは役に立ちましたか？

はい いいえ
スコア 0

1件のコメント:

Yup thats what I use: 3M 300LSE

さんによる

コメントを追加

回答を追加する

barry chern さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 126