修理を始めるには コミュニティ ストア

2015年9月25日に発売。モデルA1687/A1634。このデバイスの修理は前モデルと似ています。スクリュードライバーとこじ開けるツールが必要です。GSM もしくは CDMA。容量は16、64か128 GB。カラーはシルバー、ゴールド、スペースグレイ、ローズゴールド。

1041回答 すべてを表示

オプション

Taptic engine not working - how to test outside of phone.

I got a client's phone today that is not vibrating. It was previously jailbroken, and had the issue a few months after that. Now after damage, no signs of drops, I'm the "first one" in it. (found some finger prints in the speaker)

I'm not sure if it has a bad lightning assembly, taptic engine or something else. I don't have spare parts to test at the moment. Any idea how to test it outside of circuit? Or any pin outs for it? Ideally I'll have another iPhone 6sp come in to try this one in that phone, but I'm not holding my breath.

Thanks

この質問に回答する 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 0
2 件のコメント

could you not add voltage to it guessing about 3v

さんによる

I could, but with what current and to what pins? It has a flex cable going to the lightning dock with about 10 pins I think? I don't have it in front of me.

さんによる

コメントを追加

3件の回答

フィルタ：
参考になった順 新しい順 古い順
最も参考になった回答

オプション

Try to get a dc power supply and take out the Taptic Engine then slowly increase the voltage to it to see if it moves. Or get a multimeter and measure the voltage across the pins on the lightning connector and make it vibrate and see if any voltage comes up.

このアンサーは役に立ちましたか？

はい いいえ
スコア 2
コメントを追加

オプション

ideally you should get some test parts as trying to test it could be the hard part and still not lead anywhere

このアンサーは役に立ちましたか？

はい いいえ
スコア 1

2 件のコメント:

Yep, ideally I would. But I am looking for another solution that's why I posted here and why I said I don't have any test parts. Unfortunately I don't see any output on ZXW for its plug as it is on the lightning assembly.

Do you have a working one? An oscilloscope you could test the output frequency and voltage with? That would be super helpful.

さんによる

i dont only iphone 6 and i dont use an oscilloscope, can you not change vibration settings in sound to see if it works

さんによる

コメントを追加

オプション

I have this problem with my 5S, he must of installed some Taptic tweak. If you press the bower button and volume up and down buttons at the same time you should feel a vibrate. Sadly updating the phone doesn’t fix it, and neither is restoring the phone from a back up.

The Fix. You will have to reset the entire phone and not restore it from a back up.

(Back up info just in case)

このアンサーは役に立ちましたか？

はい いいえ
スコア 0

1件のコメント:

I did a DFU restore from a new firmware I downloaded from Apple. 11.0.3. Phone is like new now, but still no luck on the Taptic problem... I think tomorrow I will recieve the parts, but the person needed their phone back - Maybe I will get my hands on it again in the future.

さんによる

コメントを追加

回答を追加する

Joseph Hughes さん、ありがとうございました！
統計データ:

過去 24時間: 2

過去 7 日: 5

過去 30 日: 14

今までの合計 4,662