メインコンテンツにスキップ

2014年10月16日に発売された iPad Air 2は初代 iPad Airの継続版でより薄くなったスタイルです。

417回答 すべてを表示

Gluing lcd to screen

After separating the glass screen from the digitizer and cleaning up I need to glue the New glass screen to the old LCD. I saw a video on YouTube that was made in Russia where a person used a glue to fuse the two parts together. She poured the glue on the LCD and put the glass screen on it. That seems to be a good way to bond the two together. Does anyone know where I can get that kind of glue and does it work? If that’s the wrong way to go about it how does a person fuse the two together?

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 1
コメントを追加

1 件の回答

選択されたソリューション

You have a catch22 problem as you'll need to use special Optically Clear Adhesive (OCA) to glue the parts together. But even that is not enough! You'll need a vacuum chamber to be able to pull the air bubbles out of the sandwich.

The bottom line here unless you have the correct tools and have practiced doing this a few times you'll have a very hard time getting it to work.

Best to bite the bullet here and get the assembly or... find someone with the proper tools to help you.

このアンサーは役に立ちましたか?

スコア 1

コメント:

As much as it hurts , you are right. I could separate the screen from the LCD with great effort, but aligning the new screen with the LCD and getting rid of the bubbles would result in a lot of frustration with bad results. Thanks for bringing me to my senses.

さんによる

@lcbd27 - Thought you might want to see this: iPad Air 2 Glass Only Repair

さんによる

コメントを追加

回答を追加する

Larry Bennett さん、ありがとうございました!
統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 8

今までの合計 1,242