解決済み: Screen Goes Blank When Home Button/Heat Shield Flex Is Plugged In - iPhone 6

Screen Goes Blank When Home Button/Heat Shield Flex Is Plugged In

Device I traded in with broken/cracked LCD showed no signs of life.

An lcd and battery change has got phone working however a strange issue I'm wondering if anyone has experienced before.

When I connect home button/heat shield flex to the board the screen goes black.

Presumed there was an issue with flex but is is the same once replaced and the same with other lcds.

Any tips be appreciated, I'm guessing pointing towards board FPC issue.

*UPDATE: Error disappears when home button is unplugged from shield.

回答がありました！ 回答を表示同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 0

投稿日: 2017年9月6日

オプション

You definitely need to inspect the Home button FPC on the logic board. It could be damaged and shorting out. But it could also be a defective Home Button that is shorting the circuit. If the FPC looks good and there are no issues with the surrounding components, then I would try to install a "regular" Home button (Touch ID will not work). If that solves the problem, it is either the button or the Mesa circuit (which drives TouchID functionality).

Ultimately, the logic board will have to be tested by a micro-solderer to understand the root cause. If it is the MESA circuit, that can be repaired to restore Touch ID.

このアンサーは役に立ちましたか？

はいいいえ

スコア 2

3 件のコメント:

Just tried a spare home button which sorted the issue. Thanks, a device without touch id will do for now

Niall さんによる2017年9月6日

Even better cleaned the old home button connection and all is working fine. Thanks

Niall さんによる2017年9月6日

Awesome! Congrats!

Minho さんによる2017年9月6日

コメントを追加

iPhone 6

Screen Goes Blank When Home Button/Heat Shield Flex Is Plugged In

1 件の回答

回答を追加する