Constant No drain error during cycle

Question

Kenmore Elite HE3 Washing Machine

The Kenmore Elite HE3 is a washing machine by Kenmore. It is identical to the Whirlpool Duet.

20回答すべてを表示

Phil Nault @philnault

評価: 1

投稿日: 2017年8月18日

オプション

Constant No drain error during cycle

I have a constant no drain error on my kenmore washer. I press the play button and the pump starts after a while, and the cycle continues, until it needs to drain again. Then I get the same error and I have to wait until the pump kicks in again. The error is intermittent and the more I use the washer without stopping, the more the error shows up, sometimes to the point where the washer is unusable for a period of time. I was able to make the pump go by using test mode, so I don't think that's the issue, but reading on other forums that seems to have fixed similar issues. I suspect the board, but it's expensive and I don't want to buy one on spec. Can anyone help?

この質問に回答する同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 0

コメントを追加

1 件の回答

mayer @mayer 評価: 689.3千 3.8千 1.1千 2.6千 · Answer 1 · 2017-08-18T20:17:53-07:00

Cause 1

Lid Switch Assembly

The lid switch assembly prevents the washer from spinning when the lid is open. If the lid switch assembly fails, the washer may stop mid-cycle. To determine if the lid switch assembly is defective, use a multimeter to test each of the lid switches for continuity. If a lid switch does not have continuity, replace it.

Cause 2

Door Lock Motor and Switch Assembly

The door lock secures the washer door shut during operation. Once the washer door is closed, the washer can begin operating. If the washer door is not latched shut, the door switch prevents the washer from operating. If the door lock is defective, the washer may stop mid cycle. The door lock can fail either mechanically or electrically. Inspect the door lock for damage. If the door lock is damaged or does not latch properly, replace it. To determine if the door lock has failed electrically, consult your washer’s diagram and use a multimeter to test each of the door lock switches for continuity. If one of the switches does not have continuity, replace the switch.

Kenmore Elite HE3 Washing Machine

Constant No drain error during cycle

1 件の回答

回答を追加する