メインコンテンツにスキップ

2011年後期モデル番号A1278 / 2.4 GHz i5 or 2.8 GHz i7 プロセッサー

591回答 すべてを表示

Water damage corrosion to board

Block Image

Block Image

Block Image

Hello, I removed my Mac book from its case today and found that the case was soaked in water. My MacBook I believe was out of charge anyway. I made sure it was turned off. I straight away dried it off, removes the back case and uplugged the battery. However it was too late and the there is corrosion to the board. What is the best way to clean this? Or what is my best chance of getting my MacBook working again?

Thanks

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0
1件のコメント

@cordon from your serial number it appears that your computer is a

MacBook Pro "Core i5" 2.4 13" Late 2011 2.4 GHz Core i5 (I5-2435M)

Intro. October 24, 2011 Disc. June 11, 2012

Order MD313LL/A Model A1278 (EMC 2555*)

Family Late 2011 13" ID MacBookPro8,1

RAM 4 GB VRAM 384 MB

Storage 500 GB HDD Optical 8X DL "SuperDrive"

Complete MacBook Pro "Core i5" 2.4 13" Late 2011 Specs

さんによる

コメントを追加

2件の回答

最も参考になった回答

@cordon "I've tried it and it's not worked." let us know what you tried. You will have to remove your board and place it in 90%+ isopropyl alcohol and use a soft brush to gently scrub the corrosion away. While you do so, check for missing, burned or otherwise damaged components. It is absolute possible that your board is destroyed and that you may need a replacement, but you could at least try. Since you need to consider the board as a lost cause you can not harm it by at least trying. Post some images of what your board looks like after you've cleaned it. Post images showing both sides of the board.

このアンサーは役に立ちましたか?

スコア 2

2 件のコメント:

Sorry, I have only cleaned the top of the board using isopropyl alcohol and a toothbrush. I'll post pictures later of what it looks like now. However It hasn't worked. I will remove the board tonight and and clean it completely. Is it possible to repair boards or do we just replace them?

さんによる

Yes it is possible to repair, sometimes.

さんによる

コメントを追加

You will want to clean it with denatured alcohol and some kind of lint free rag.

このアンサーは役に立ちましたか?

スコア 0

2 件のコメント:

or an old tooth brush.

さんによる

I've tried it and it's not worked. What is the next option? Or should I be looking at a new computer?

さんによる

コメントを追加

回答を追加する

Daniel cordon さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 168