メインコンテンツにスキップ

Sony Xperia Z5 は5.2インチ、1080 x 1920ピクセルディスプレイ、 3GB RAM/23 MP のリアカメラ、Qualcomm Snapdragon 810プロセッサーを搭載しています。

74回答 すべてを表示

After a water immersion the LCD screen doesn't work

First of all sorry for my bad english...

I put four hours ago my z5 in some water, it was not the first time, after a few minutes the screen died, but the rest of the Phone properly works! The notification Light blink, the touch give vibration feedback, the charging work, all it's working except the LCD screen.

What you suggest to do?

Thanks a lot

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

1 件の回答

ベストアンサー

@fittone, Federico, Stop charging or powering up your device until the liquid damage is addressed correctly, as you could be shorting out components inside the phone. You really should take care of the corrosion that is happening inside the phone from the water damage as that could be your problem. A tear down link for your device Link #1, disassembly guide will enable you to get inside the phone to remove the damage/corrosion caused by the liquid. Use the 2nd link as a guide/instruction on how to clean/repair the device from liquid damage. After this you will be able to power on the phone and see if further damage has to be addressed. Good luck.

I hope this helped you out, if so let me know by pressing the helpful button.

Sony Xperia Z5の分解

Electronics Water Damage

このアンサーは役に立ちましたか?

スコア 4

2 件のコメント:

Ehy thanks L Pfaff! I hope to do this asap, but my Phone doesn't was IP certifing for immersions?

さんによる

Don't rely on it as the LCD got liquid damaged.

さんによる

コメントを追加

回答を追加する

Federico Fiorentini さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 3

今までの合計 1,275