評価: 4.3千
19
20
22
Hello iFixit! I need a bit of help here because I cleaned my Apple Watch Sport 2 With a alcohol prep pad, and some of the cloth is now stuck inside the digital crown, making it hard to turn on occasion. My nearest Apple Store is 2 hours away and I have all the tools to DIY it. What should I do?
この質問は役に立ちましたか？
評価: 101.2千
8
172
358
@reedcrosby,Reed, You may have to get yourself a cheap dollar store magnifier/glasses to aid in seeing if fibers are accessible to dislodge with a small pin/compressed air(should work). If not then you may have to partially disassemble watch to get at debri. Link below shows how to disassemble, if need be. Good luck. I hope this helped you out, if so let me know by pressing the helpful button.
このアンサーは役に立ちましたか？
Thank you! I never thought of that...
@reedcrosby, Reed, Welcome, thanks for replying back and good luck with your Apple watch.
Thanks for the luck, I might need it!
評価: 16.1千
39
92
13
Try getting some tweezers and just slowly getting rid of all the fibers, they should eventually come out.
このアンサーは役に立ちましたか？
I would, but the issue is I cannot see them but I can feel the resistance from them.
過去 24時間: 0
過去 7 日: 10
過去 30 日: 31
今までの合計 2,907
1件のコメント
I would also like if it could be done without opening it as I like my waterproofing seals!
Reed Crosby さんによる