DIY fusion drive data transfer

Question

Mac Mini Mid 2011

2011年7月21日に発売されたMac Mini Mid 2011モデルはCore i5もしくはCore i7プロセッサ、Thunderboltを搭載しています。

204回答すべてを表示

Xi Liu @dharry

評価: 23

2

1

投稿日: 2017年4月26日

オプション

DIY fusion drive data transfer

I made DIY fusion drive, everything works well, but after some gaming, I guess the graphic card is dead, Machine won't boot up to Apple screen, fan in full speed. I'm pretty sure the fusion drive is unharmed, now the question is, how do I transfer those data from fusion drive to other places? Probably not taking SSD and HDD one by one, and transfer data one by one....

And weird thing is, no one on internet every ask or answer this kind of question.

Any help please?

Thanks!

回答がありました！ 回答を表示同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 1

コメントを追加

1 件の回答

ベストアンサー

Dan @danj

評価: 479.5千

Self employed contract worker

35

329

971

投稿日: 2017年4月27日

オプション

Not to worry! The HD has a full copy of all of your data. So all you need to do is remove it to salvage what was on your system.

このアンサーは役に立ちましたか？

はいいいえ

スコア 3

14 件のコメント:

Thanks a lot for your answer! I feel much less panic now!!

Just want to be more clear, you mean the HDD only (not SSD) has the full copy of data? Or still has to be the HDD+SSD bundle?

Xi Liu さんによる2017年4月27日

Just the traditional spinning drive (HD) is what is needed here.

A Fusion Drive is setup so a copy of the more accessed files is copied to the SSD so its faster in I/O access. A pointer is then use to point to the SSD copy but if the SSD copy is altered it is copied back to the HD so its copy is up to date.

Dan さんによる2017年4月27日

Thank you soooo much, sir!

Xi Liu さんによる2017年4月27日

Hi, Dan. I hooked the HD to an external hard drive case, and plug to my other Mac, it appears the Mac doesn't recognise the disk. however, from Disk Utility, it appears there ¨500GB, unformatted¨. Is there anything else I should be aware of?

Xi Liu さんによる2017年4月30日

Did you encrypt the drive? The disk you took out of your dead system should be readable as is if it wasn't encrypted. You may need to use some better disk/file recovery tools like:Drive Genius and/or Disk Rescue there are other tools that do the something as these I found these are easier to use and dependable.

Dan さんによる2017年4月30日

9件以上のコメントを表示

コメントを追加

Thanks a lot for your answer! I feel much less panic now!!

Just want to be more clear, you mean the HDD only (not SSD) has the full copy of data? Or still has to be the HDD+SSD bundle? — Xi Liu
Just the traditional spinning drive (HD) is what is needed here.

A Fusion Drive is setup so a copy of the more accessed files is copied to the SSD so its faster in I/O access. A pointer is then use to point to the SSD copy but if the SSD copy is altered it is copied back to the HD so its copy is up to date. — Dan
Hi, Dan. I hooked the HD to an external hard drive case, and plug to my other Mac, it appears the Mac doesn't recognise the disk. however, from Disk Utility, it appears there ¨500GB, unformatted¨. Is there anything else I should be aware of? — Xi Liu
Did you encrypt the drive? The disk you took out of your dead system should be readable as is if it wasn't encrypted. You may need to use some better disk/file recovery tools like:Drive Genius and/or Disk Rescue there are other tools that do the something as these I found these are easier to use and dependable. — Dan

Mac Mini Mid 2011

DIY fusion drive data transfer

1 件の回答

回答を追加する