メインコンテンツにスキップ

ユニボディMacBook Pro 13インチ Unibodyディスプレイモデルは2009年〜2012年に製造販売されました。

4630回答 すべてを表示

Battery not charging despite SMC reset after water damage

My girlfriend spilled some water onto my MacBook 13" mid 2009 a month or so ago. I didn't immediately notice it had gotten wet so I didn't take any precautions to shut it down or dry it out.

Everything on it works perfectly except the batter will not charge now. I've tried the SMC reset and I've swapped the battery into another macbook and it started charging, so it doesn't appear to be the battery.

I've read on another forum that it could be a problem with the logic board. What do you guys think? And if it is the logic board, could I swap out one from another mid 2009 MacBook thats having hard drive problems into mine?

Here's the coconut battery read out.

Block Image

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

1 件の回答

最も参考になった回答

As long as its part of the same series you should be able to swap the logic boards. Hopefully you're not swapping problems ;-}

I would recommend you plug in both systems S/N into here: EveryMac - Lookup to make sure they are the same ID String. If not then all bets are off.

このアンサーは役に立ちましたか?

スコア 2
コメントを追加

回答を追加する

gabe さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 2

今までの合計 274