メインコンテンツにスキップ

2.26 or 2.4 GHz / White plastic unibody enclosure

645回答 すべてを表示

Why is my MacBook freezing and heating up?

Hi,

My mid-2010 MacBook is starting to overheat, and according to the temperature sensors, the CPU is hitting 100+ degrees Fahrenheit. I ran the AHT, and it can't get past the RAM test without locking up. Is my heatsink damaged, or is the motherboard FUBAR?

Thanks!

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 1
コメントを追加

1 件の回答

ベストアンサー

Well if it can't get past the RAM test, that where I would start.

Update

Will it boot all the way up? It so go under the Apple to about this Mac> Memory and see if it is seeing what's installed. If it is not seeing all of it, reseat the RAM.

Next open it up and blow it out. If it is heavy on the dust, remove the fans and clean the vents. Here's how:

MacBook Unibody Model A1342 Fan Replacement

Now boot the Mac with the back off and insure that the fan is running.

If it is still running hot we need to look at the heat sink and thermal paste replacement. This model uses a liquid filled heat sink that can develop a leak. So when you go to replace the paste look on the logic board for traces of an oily looking stain. If you find it, replace the heat sink.

MacBook Unibody Model A1342 Heat Sink Replacement

放熱グリスの塗布方法

[リンクされた製品が存在しない、もしくは無効: IF179-010]

Electronics Skillsの画像

ガイド

放熱グリスの塗布方法

難易度:

中レベル

5 - 20 minutes

MacBook Unibody Model A1342 Fanの画像

ガイド

MacBook Unibody Model A1342 Fan Replacement

難易度:

中レベル

10 - 30 minutes

MacBook Unibody Model A1342 Heat Sinkの画像

ガイド

MacBook Unibody Model A1342 Heat Sink Replacement

難易度:

難しい

15 - 30 minutes

このアンサーは役に立ちましたか?

スコア 4

2 件のコメント:

Well, how should I check it? Is there a program I can get to do it?

さんによる

It sees all of the RAM. I've confirmed the fan is fully working, so I'll check the heatsink when I get a chance. Thanks!

さんによる

コメントを追加

回答を追加する

Nikola Wozniak さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 1

今までの合計 721