修理を始めるには コミュニティ ストア

2014年9月19日に発売されたiPhone 6の修理情報とガイドです。モデル番号 A1549、A1586、A1589。

4994回答 すべてを表示

オプション

Quick question: is touch id extension cable paired to logicboard?

I know this is probably already somewhere online, but a google didn't yield helpful answers.

Anyone know if touch id extension cable is paired to the logic board? Not the home button sensor itself, the extension cable beneath the metal shield. Has anyone successfully replaced that cable and was able to use touch id and restore fine? I know all restores should work fine even with the cable completely disconnected since apple changed it earlier this year.

Thanks.

回答がありました！ 回答を表示 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

3件の回答

フィルタ：
参考になった順 新しい順 古い順
ベストアンサー

オプション

No the cable extension is not paired to the motherboard, only the home button is.

このアンサーは役に立ちましたか？

はい いいえ
スコア 2

3 件のコメント:

I can confirm this. Already replaced a few iPhone 6 and 6+ home button extension cables with and without metal plate.

さんによる

Thanks, exactly what I was looking for. I'm going to do a repair like this and will update to confirm.

さんによる

Just make sure you power down the phone, then disconnect the battery. If its for a customer, I heard that having them remove Touch ID purchases from the app store reduces errors but I can't confirm since I've never seen it work or not work in person.

さんによる

コメントを追加
最も参考になった回答

オプション

no i dont think its paired to the logic board the actual bit that sits right next to home button is paired

このアンサーは役に立ちましたか？

はい いいえ
スコア 2
コメントを追加

オプション

No it isn't. It was in the iPhone 5s, and you couldn't really open it withourt snapping the cable. But i have opned a lot of iPhones, and lot of the 6' model. The cable isn't attached so you can open it without snapping the cable.

Happy repairing!

Greetings

このアンサーは役に立ちましたか？

はい いいえ
スコア 0

4 件のコメント:

I cannot count the number of iPhone 5S's I have opened and I've never snapped a Touch ID cable on those. Saying you cannot open a 5S without damaging it is just plain wrong.

さんによる

I mean is it paired in software, not physically attatched like that, and yes like josh said, I've opened many iphone 5s phones without damagind anything.

さんによる

Its not paired in any way. Its just a flex cable, no ICs. Take one apart sometime. The flex runs along the LCD shield and then they put a sticker over it as some kind of insulation. You can pull the flex cable from under the insulation and inspect it. Its just traces, no IC's.

iFixit should use their fancy x-ray machine on one and put this to bed.

さんによる

Yea thats what I thought. If you were to use a multimeter in continuity mode, you should be able to trace each pin to the one on the other side.

さんによる

コメントを追加

回答を追加する

echow2001 さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 588