修理を始めるには コミュニティ ストア

2014年9月19日に発売されたiPhone 6の修理情報とガイドです。モデル番号 A1549、A1586、A1589。

4994回答 すべてを表示

オプション

What is causing blue 'aura' effect on iPhone display after replacement

After replacing an iPhone 6 display for a friend, it has been working great except for one thing: the display show's a blue 'aura' effect when applying pressure on certain parts of the display. It also appears that it is slightly lifted from the phone — as in I can hardly tell unless I look at it from a weird angle. I'm no repair professional, so I wanted an opinion on what might be causing this. My guess so far is that the display cables aren't in all the way, or the display itself just needs to be reseated and the clips to snap in all the way.

回答がありました！ 回答を表示 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 0
1件のコメント

Thought I'd add, this also happens when tapping on the screen...

さんによる

コメントを追加

2件の回答

フィルタ：
参考になった順 新しい順 古い順
ベストアンサー

オプション

The blue pressure on the screen is causes by uneven LOCA Liquid Glue. If it is not spread out evenly this occurs.

Those are pressure marks just to be clear.

Check if there is anything under the screen between metal back frame of screen and loudspeaker / earpiece speaker.

Also check the back of the screen on the black part for any dust / dirt / glass).

Those are both magnetic with speaker filters and can gather dust or lint on.

Also if the frame is dented in a way that doesn't let the screen sit flush to the frame properly it can cause that too. In that case the metal housing frame needs to be bent back in place.

Another reason is the battery being bloated putting pressure under the screen but this is uncommon.

Other than that you can't really do much about it and most likely need to put another screen in result.

このアンサーは役に立ちましたか？

はい いいえ
スコア 2

3 件のコメント:

Thanks. I'll open it up today and check it out for dust and dirt. Is it possible that pieces of the old djisplay have broken off and not allowed the clips to snap in all the way?

さんによる

I guess so but that is highly unlikely for it to occur.

さんによる

Well, I took it into a repair shop that inspected the phone, then reseated the display cables and display. Since it's still having an issue, I think it's just a bad part.

さんによる

コメントを追加

オプション

I've seen this before. Cheap screen. Buy another from a different supplier.

このアンサーは役に立ちましたか？

はい いいえ
スコア 1

4 件のコメント:

Is there another possible issue. This was still expensive — $50-60. It seemed to be good... Here's the link:

https://www.amazon.com/gp/product/B01H2Y...

さんによる

That's just my experience. I replaced it with a screen from another supplier and it fixed the issue.

さんによる

Okay. Do you know of anything else I could try before returning it? Could reseating display/cables help?

さんによる

Reseating the cables wouldn't help, it's a screen pressure issue like I posted in my answer below.

さんによる

コメントを追加

回答を追加する

Jake さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 5

過去 30 日: 10

今までの合計 140