メインコンテンツにスキップ

iPhoneの第4代目で、修理はそのままパーツを直接交換するだけです。しかし、正面ガラスとLCDはセットで交換する必要があります。容量はGSM / 8,、16m32 GB / モデル番号 A1332 /本体カラーは黒と白色

2397回答 すべてを表示

iPhone 4 front frame replacement

I dropped my iPhone 4 accidentally and there is now a small chip at the bottom of the front panel, its a piece of rubber that came off.( The black rubber that surrounds the front glass) Although its pretty small, i'm kinda bothered by it but I have found a replacement for it. I would just like to know if its easy to replace that part? Is it easily removable from the front glass panel?

http://www.chinaontrade.com/apple-iphone...

Thats where i found the part.

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア -1
コメントを追加

3件の回答

ベストアンサー

Um, wow. Just to remove the display assembly, you have to pretty much disassemble the whole phone.

iPhone 4 front panel assembly

You will then have to figure out how to get that piece off of the display assembly, which may be really difficult, seeing as the glass and display are securely glued together (check out step 22 and the associated description). The part is also most likely glued to the glass, and hopefully not sandwiched by the display. If that is the case, carefully use a heat gun to loosen the adhesive and gently pry it away from the glass. For the new part, apply a new adhesive, let set, and put it back together.

Unfortunately, I don't have one to do this to myself, but if you are feeling up to it, and it works, please photo document the process and post a repair guide for others to follow.

In short, is it easy to replace; probably not. However, is it worth it; quite possibly yes.

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

iPhone 4s front glass replacement

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

You will have to take the whole iPhone apart. you can see a video how to do it here http://youtu.be/JapCRFqLmEY

After just put the plastic frame away from the glass and LCD assembly.

Plastic part is glued to the glass by a thin strip of adhesive so it is not hard to take apart.

If you are looking at the front of the glass pull the frame away in left and right direction not downward, because the plastic frame comes in btw the glass and lcd and you can damage the lcd by pulling the frame downwards toward LCD. Remember you can always use heat gun or blowdryer to make it easier.

Hope that makes sense : )

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Wai Soong さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 7

今までの合計 5,835