メインコンテンツにスキップ

2014年9月19日に発売されたiPhone 6の修理情報とガイドです。モデル番号 A1549、A1586、A1589。

4994回答 すべてを表示

error 53 when restoring/updating OS after replacing home button

I replaced the home button on my iphone 6. I then tried updating my phone to iOS 9.0.2 and the upgrade fails halfway through with error 53. Apparently this is a hardware error that occurs when the logic board and home button do not match. Now my phone is stuck in recovery mode. Is there a way to make this brick work again? I thought about trying to solder a new home button cable to my original home button but i'm not too confident in that solution after examining the back of the home button. It lools like the cable slides into and around the button some how.

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 2
コメントを追加

3件の回答

mwebst01, since you already know what caused the error you know that only Apple can repair this iPhone or replace the whole device.

このアンサーは役に立ちましたか?

スコア 0

1件のコメント:

I was afraid of that. I was hoping someone knew of a method to bypass the hardware check when performing a restore/upgrade. I wish I would have known about this issue before wasting $35 on a new home button. It seems the truth of the matter is iCantFixIt.

さんによる

コメントを追加

man there is a solution , but u need to have 2 iphone, 1 working good and the other with the problem, both of them need to be the same model (srry i dont speak english well) you need to change the iphone motherboard from the iphone that has the problem to the working one , disconect the screen and homebotton(of the working one whit the motherboard of the iphone with the problem) , plug in to the pc and restore on itunes , after u finish just change the motherboard and you will fix the problem, im from mexico and that is a solution that we find

このアンサーは役に立ちましたか?

スコア 0

7 件のコメント:

Is it hard to disconnect the motherboard?

さんによる

Thanks for the information. I don't have access to another phone but for fun, are you saying I could do the following to correct this problem?

iPhone A works.

iPhone B broken.

move B.motherboard to A.

Remove A.screen and A.homebutton.

Connect A to iTunes and restore.

Return B.motherboard to B.

さんによる

it is not too hard, and yes that is what i mean if you follow those steps you are going to fix any iphone with the 53 problem. I do this like 6 times and it works, Just find another iphone. :D

さんによる

And how do you remove the motherboard? With a heatgun? Or ...

さんによる

@edgarr91 Can I update the phone after this fix? And will the touch ID work?

さんによる

2件以上のコメントを表示

コメントを追加

You dont need any heat to replace a motherboard. 1. Takethe screen off (2pentalobes) disconect all flexes and remove all screws on motherboard. Takes about 5/10minutes if you know what are you doing

このアンサーは役に立ちましたか?

スコア 0

1件のコメント:

Have you tried this method yourself?

さんによる

コメントを追加

回答を追加する

mwebst01 さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 351