修理を始めるには コミュニティ ストア

モデル番号A1297 Unibody: Early 2009, Mid 2009, Mid 2010, Early 2011 & Late 2011

544回答 すべてを表示

オプション

Missing capacitor needs to be replaced

Hello my name is Sgt John P. Sunga - USMC. I recently acquired an early 2009 MacBook Pro 17". It was not booting up. After breakdown and cleanup and applying new thermal paste, I discovered one side of a tiny small capacitor broken off. When lined up proper, it boots up and everything works great. The caps was just barely hanging on and finally broke off. There are no markings on the caps but I took a picture of Where it is located. If anyone out there knows what type of cap and where to get it, that would be greatly appreciated.

Thanks,

John

Block Image

https://www.dropbox.com/sh/ma1d85a1p0d36...

The cap is located on the immediate left of resistor R7120. Below the missing cap looks like two identical caps that are mounted vertically.

回答がありました！ 回答を表示 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 1
コメントを追加

2件の回答

フィルタ：
参考になった順 新しい順 古い順
ベストアンサー

オプション

SgtJohnPSunga, thank you. The part that is missing is C7196 which is a 0.1UF 16V 10% capacitor in a 402 package. Available right here as well as many other places.

Update 09/03/2015

Location of C7771

Block Image

このアンサーは役に立ちましたか？

はい いいえ
スコア 1

2 件のコメント:

C7771 is a 330UF 2.0V 20% Poly Tant capacitor in a B2 case. Available right here as well as many other places.

さんによる

Thanks so much.m I didn't expect an a response this quickly, this really helps me out. Thanks again.

さんによる

コメントを追加
最も参考になった回答

オプション

While this is open, since you are already soldering, replace C7771. Its time to die is coming.

このアンサーは役に立ちましたか？

はい いいえ
スコア 2

2 件のコメント:

I'll go ahead and replace this as well. Is this the same cap?

さんによる

Where is the C7771 located?

さんによる

コメントを追加

回答を追加する

SgtJohnPSunga さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 5

過去 30 日: 14

今までの合計 2,810