2 Screen not turning on after replacement, periodic charge sound as well
I replaced the LCD in my iphone 6. Upon reassembling and trying to power it back on nothing was happening. I plugged it into the charger and after a minute or so it started making the charge sound every few seconds meanwhile the screen was still completely blank. I then plugged it into my computer and itunes recognized it completely along with all the stuff i had stored on it. The screen is connected 100% correctly. Im completely baffled. Any and all inquiries are appreciated.
I just checked everything again, also tried unplugging the camera cable and turning it on to see if that was the issue. Everything else on the phone has power and is recognized by my computer. The screen just seems to not be getting power.
ficaras0 さんによる
Also have tried unplugging battery and holding the home button to drain the power.
ficaras0 さんによる
Seems as though im just talking to myself at this point, but i have also tried the old screen which was still functional this also did not work. At this point i think i can narrow it down to either the logic board or possible the lcd cover plate which has the cable attatched to it. Can anyone confirm that if this cable is damaged it will stop the screen from turning on?
ficaras0 さんによる
Still no solution. Iv'e exhausted every option.
ficaras0 さんによる