メインコンテンツにスキップ

A handheld, user-friendly electronic label maker manufactured by Brother.

1の回答 すべてを表示

My unit wont turn on

I already replaced the ac adapter with a new one and the machine still won't turn on. I don't use the unit with batteries at all as it drains the batteries very quickly.

the screen remains blank. any suggestions?

Update

so i tested it out today with batteries and the unit turned on! Which makes me think something is wrong with the metal prong that attaches to the adapter. I also tested my adapter with my dvd player and it worked. So now I know what the problem is but can this be fixed? It looks fine to me; is not loose or broken.

Block Image

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 1

コメント:

i have the PT-D600 that wont turn on, or do anything at all..

による

コメントを追加

Android 修理キット

A new screen or battery is one kit away.

ショップを見る

Android 修理キット

A new screen or battery is one kit away.

ショップを見る

3回答

最も参考になった回答

noosheen, start by opening it up using these guides. Then use a multimeter and plug your power adapter in. Measure the voltage on the solder points of the jack on the logic board. It is possible that it has broken off, that you have colder solder joints or that the jack itself has failed.

この回答は役に立ちましたか?

スコア 1
コメントを追加

REFER TO THESE it seems

SOMEONE MAY HAVE DROPPED IT. SOMETHING SEEMS BROKEN.

Brother PT-D200 Troubleshooting

この回答は役に立ちましたか?

スコア 0
コメントを追加

I have bought 2 adapters and both do not turn on the machine. I have also put in 6 brand new batteries and still won't turn on.

この回答は役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

noosheen さん、ありがとうございました!
統計データを表示:

過去 24時間: 0

過去 7 日: 9

過去 30 日: 35

今までの合計 3,503