No service after taking apart.

Question

iPhone 3GS

より早い処理スピードを可能にしたiPhone 3Gのアップグレード版です。このデバイスの修理は3Gと似ており、標準のドライバーと開口ツールが必要です。モデル番号 A1303 / 16 もしくは 32 GBの容量 / ブラックもしくはプラスチックの背面ケース

1502回答すべてを表示

brandon @brandon67611

評価: 1

1

投稿日: 2010年6月29日

オプション

No service after taking apart.

I took my iPhone apart to replace the vibrator and i then got confident and readjusted the power button becuase it wasnt right, i then couldnt get it working forever but finally got it and now i get HORRIBLE service. before where i got 5 bars and 3g im barley getting 1 bar and E. i dont know what it could be. my only guess is the number 7 connector because it doesnt seem to hook up right. any help would be awesome. everything els works fine thou just bad service. Thank you all in advance,

回答がありました！ 回答を表示同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア -1

コメントを追加

2件の回答

ベストアンサー

markus weiher @markusweiher

評価: 35.1千

140

71

53

投稿日: 2010年6月29日

オプション

your right - if no. 7 isn't connected well, the reception could be bad - but it's a fragile part - be careful not to break the connector!

try to connect it properly (i know that sounds not "nice" - but i would do that for you if you bring it, but in my case - i'm from germany and that would be a to long distance for the most ifixit users ;-) )

このアンサーは役に立ちましたか？

はいいいえ

スコア 0

4 件のコメント:

ok the problem is the numer 7 doesnt seem to connect right, it wont snap on there at all. i think it might possibly be broken. is there anyway i can fix that or do i have to get new parts? thanks for all your help

brandon さんによる2010年6月30日

that depends where it's broken - cable side or logic board side? - but if it's broken, it should look "odd"

markus weiher さんによる2010年6月30日

I think both sides are messed up, it wont snap together but i tried holding them together hopeing that it would show some reception but it didnt do anything.

brandon さんによる2010年7月2日

if one of the sides has lost it's contact - you won't have any signal. i did only find the antenna on ebay,changing the part on the logicboard would involve soldering (but in that case, some "guerilla's" simply using 2 small wires and soldering the dock antenna contacts to the opposite side on the antenna, the cables should be long enough to open the phone again and work "freely" with it - but thin enough to get hidden inside the phone

markus weiher さんによる2010年7月2日

コメントを追加

ok the problem is the numer 7 doesnt seem to connect right, it wont snap on there at all. i think it might possibly be broken. is there anyway i can fix that or do i have to get new parts? thanks for all your help — brandon
that depends where it's broken - cable side or logic board side? - but if it's broken, it should look "odd" — markus weiher
I think both sides are messed up, it wont snap together but i tried holding them together hopeing that it would show some reception but it didnt do anything. — brandon
if one of the sides has lost it's contact - you won't have any signal. i did only find the antenna on ebay,changing the part on the logicboard would involve soldering (but in that case, some "guerilla's" simply using 2 small wires and soldering the dock antenna contacts to the opposite side on the antenna, the cables should be long enough to open the phone again and work "freely" with it - but thin enough to get hidden inside the phone — markus weiher

james labonville @jameslabonville 評価: 1 · Answer 1 · 2012-04-03T12:19:14-07:00

james labonville @jameslabonville

評価: 1

投稿日: 2012年4月3日

オプション

yeah i have the same problem but i can snap my number 7 in place but i still get one bar some times 3 but thats only at my house if i go any were els i get noting

このアンサーは役に立ちましたか？

はいいいえ

スコア 0

コメントを追加

iPhone 3GS

No service after taking apart.

2件の回答

回答を追加する