修理を始めるには コミュニティ ストア

iPhone 4のCDMA版モデルです。修理はそのままパーツに作業をしますが、フロントガラスとLCDはユニットで交換しなければなりません。16もしくは32 GB / Model A1349。

295回答 すべてを表示
締切られた回答

オプション

Battery repair failed... why?

I followed the instructions to replace the battery on my iPhone 4 Verizon. The phone wakes up when plugged into the wall but doesn't hold a charge.

I've repeated the process several times trying to get a different result but no luck. After the first time I wore plastic gloves and wiped down the inside with hydrogen peroxide to make sure there were no finger oils getting in the way.

I successfully changed the battery on an iPhone 4S in the same go.

What could be the problem?

この質問に回答する 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

1 件の回答

フィルタ：
参考になった順 新しい順 古い順

オプション

Could be a number of things, but most likely you're dealing with a faulty part. From my experience as a repair tech, aftermarket iPhone batteries have a rather high defective rate.

On a side not, I would not recommend using hydrogen peroxide as a cleaning agent for sensitive electronics like this. Using legitimate electronics contact cleaner is the best way to go, but most people don't have that laying around the house. Most people do have 70% isopropyl though, and that will do just find in most cases.

このアンサーは役に立ちましたか？

はい いいえ
スコア 0
コメントを追加
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 91