Need help identify component on logic board that burnt

Tom Shoemer, that is reference designator L3404 with the description of FERR-120-OHM-1.5A in a 0402 package. It is a Ferrite Chip Bead and Murata Part number is BLM15EG121SN1D. The part is available at places like this. Hope this helps, good luck.

This is the response to your updated question. The item 'missing' is reference designator C6301. It is a 2.2UF 20% 10V X5R capacitor in a 402 package. Check The components marked by the yellow arrows. It is possible that it is just my bad eyesight (no more hawk eye;-) make sure those are still all there. Hope this helps, good luck.

Reference designator C6313 820PF 10% 50V Cerm 402 package capacitor

Reference designator C6303 820PF 10% 50V Cerm 402 package

Reference designator R6211 39ohm 5% 1/16W 402 package

このアンサーは役に立ちましたか？

はいいいえ

スコア 3

4 件のコメント:

Yes, the lower two components, that are marked with the lower two yellow arrows in the picture above, are missing, too.

And those are not the only ones. I found many more blank solder contacts.

How is that posible that there are so many components missing?

And what are the components for the two lower yellow arrows?

I bought this broken macbook pro as a just for fun project, but with so many possible missing components i think is a dead project.

Tom Shoemer さんによる2014年2月12日

Since you do not know the history of the board, it may be that someone used the parts to repair another computer; hard to say. So far, your parts are not very expensive and it looks like the solder pads are all in good condition. Since you bought it as a project, it is your call if you want to continue to try to resurrect it or to discard it. All a question of economics:-)

oldturkey03 さんによる2014年2月12日

Thanks a lot for the description of the missing items.

Do you have a close up picture of that board in high resolution so that i can check what item is missing and which one not?

Thank you!

Tom Shoemer さんによる2014年2月13日

Sorry, I do not have an image. How about you post a couple of images and see if we can help you with it. Or you can email them to me. My email address is in my profile that you can access by clicking on my avatar:-)

oldturkey03 さんによる2014年2月13日

コメントを追加

Yes, the lower two components, that are marked with the lower two yellow arrows in the picture above, are missing, too.

And those are not the only ones. I found many more blank solder contacts.

How is that posible that there are so many components missing?

And what are the components for the two lower yellow arrows?

I bought this broken macbook pro as a just for fun project, but with so many possible missing components i think is a dead project. — Tom Shoemer
Since you do not know the history of the board, it may be that someone used the parts to repair another computer; hard to say. So far, your parts are not very expensive and it looks like the solder pads are all in good condition. Since you bought it as a project, it is your call if you want to continue to try to resurrect it or to discard it. All a question of economics:-) — oldturkey03
Thanks a lot for the description of the missing items.

Do you have a close up picture of that board in high resolution so that i can check what item is missing and which one not?

Thank you! — Tom Shoemer
Sorry, I do not have an image. How about you post a couple of images and see if we can help you with it. Or you can email them to me. My email address is in my profile that you can access by clicking on my avatar:-) — oldturkey03

MacBook Pro 13インチ Unibody Mid 2009

Need help identify component on logic board that burnt

Update

1 件の回答

Update

further Update

回答を追加する