Stripped screw when installing second HDD, replacing Optical Drive Bay

Question

MacBook Pro 15インチ Unibody Mid 2012

2012年6月発売。Core i7プロセッサ、Turbo Boost / 最大1 GB DDR5 Video RAM

596回答すべてを表示

D1Xenotime @d1xenotime

評価: 9

3

1

投稿日: 2013年6月14日

オプション

Stripped screw when installing second HDD, replacing Optical Drive Bay

Hi iFixIt,

I was trying to install the second drive bay and substituting the optical drive bay...

In this tutorial step 8: MacBook Pro 15" Unibody Late 2011光学ドライブの交換

I could not get the two screws out. They were really tight. I used a Phillips #00 screwdriver as stated in the required tool, but ended up stripping the screw.

I gave more attempt switching to the flat head and it made it worst. Now it almost has no more x marking... And I am desperately finding a way to get it out.

I tried the rubber band method, but the screwdrivers just goes right through... It stripped a little more everytime I put pressure on it unscrewing it.

回答がありました！ 回答を表示同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア -1

1件のコメント

Ok guys, I got it out by:

- Drilling the head off

- Using a very thin plier

- Clamping the head

- Screwing it out...

Now does anyone have any idea where I can get the replacement screws? The current one now has lost their head... Suggestions welcome.

D1Xenotime さんによる2013年6月16日

コメントを追加

1 件の回答

ベストアンサー

Dan @danj

評価: 479.4千

Self employed contract worker

35

329

971

投稿日: 2013年6月14日

オプション

Ouch!

If you have room try using a jewelers drill to grasp the outer wall of the screw. If not, time for the drill. Mask off the area really well so the metal shavings don't mess up the works. Use the smallest drill to get the head off then try the jewelers drill again to grasp whats left. If that still doesn't work you'll need to drill and tap the hole for a replacement screw, be careful here as the alignment of the hole needs to stay the same.

このアンサーは役に立ちましたか？

はいいいえ

スコア 2

2 件のコメント:

I don't have any jewellers drills. Basically, my case is very similar to this dude posted in another forum... I do not know what he did, but it seems he cut something?

I heard the superglue works... But I guess this will be my last resort. Anyone tried this method?

The clipping does not seems to work as the other screw is in a depression point, as it is inside the metal antenna. So I am having the same dilemma as this dude over here: http://forums.macrumors.com/showthread.p...

D1Xenotime さんによる2013年6月14日

trying to glue the driver to the screw may work however if you get glue between the screw and any other part or into the thread you are in more trouble....

Richdave さんによる2013年6月14日

コメントを追加

Ok guys, I got it out by:

- Drilling the head off

- Using a very thin plier

- Clamping the head

- Screwing it out...

Now does anyone have any idea where I can get the replacement screws? The current one now has lost their head... Suggestions welcome. — D1Xenotime
I don't have any jewellers drills. Basically, my case is very similar to this dude posted in another forum... I do not know what he did, but it seems he cut something?

I heard the superglue works... But I guess this will be my last resort. Anyone tried this method?

The clipping does not seems to work as the other screw is in a depression point, as it is inside the metal antenna. So I am having the same dilemma as this dude over here: http://forums.macrumors.com/showthread.p... — D1Xenotime
trying to glue the driver to the screw may work however if you get glue between the screw and any other part or into the thread you are in more trouble.... — Richdave

MacBook Pro 15インチ Unibody Mid 2012

Stripped screw when installing second HDD, replacing Optical Drive Bay

1 件の回答

回答を追加する