メインコンテンツにスキップ

CDMA iPad 2モデルの第二世代は16、32、64GBのオプションがあり、Dual Core A5プロセッサが搭載されています。モデル番号はA1397です。修理は細かい作業が含まれ、熱で温めてこじ開ける作業が必須です。

64の回答 すべて表示

dropped ipad, bent the alluminium case on the volume bottom

I've just dropped my ipad and the alluminium case bent on the volume button, i cant use the volume button and it stuck inside (volume square is frozen on the sceen). Is it possible to open the ipad and reshape the allumium case or is it too risky?

回答がありました! View the answer 同じ問題があります

この質問は役に立ちましたか?

スコア 2
コメントを追加

PCラップトップ用バッテリー

An easy fix for a big power boost.

ショップを見る

PCラップトップ用バッテリー

An easy fix for a big power boost.

ショップを見る

2回答

選択されたソリューション

Hi Lou,

As you have probably noted, there is no screw to open the iPad 2 and in fact it make opening this iDevice much more complicate that an iPhone for example.

This is the reason why all iPad 2 guides are marked "Very difficult"!

I wouldn't say it is too risky, it depends on you, your skills and probably also your tools. If you want to make a good job you will have to use the good tools. Look at this iOpener at least!

  • If you decide to access the volume button hole from inside the rear case, the minimum require disassemble is the display. Look at this guide so you will have a better view on what you would have to do.
  • Once you will have the screen out, you will have a better view if further dis-assembly is required. Any further dis-assembly should be piece of cake after what you've done just before!
  • Also remember that you're gonna have to re-install the screen with new adhesive strips after that. (New adhesive strips available here.)

Let us know what is your decision, and good luck!

iPad 2 Adhesive Strips画像

製品

iPad 2 Adhesive Strips

$6.99

iOpener画像

製品

iOpener

$19.99

iPad 2 CDMA LCD画像

ガイド

iPad 2 CDMA LCD Replacement

難易度:

とても難しい

iPad 2 CDMA Front Panel Adhesive Strips画像

ガイド

iPad 2 CDMA Front Panel Adhesive Strips Replacement

難易度:

普通

この回答は役に立ちましたか?

スコア 2
コメントを追加

If the case is bent in the volume control area you can just use pliers to unbend the case. Be careful and use a cloth pad to avoid scaring the case. In my case (pun intended) the thin aluminum above the cutout part of the case was bent and Apple wanted almost as much as a new one to repair it.

この回答は役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Lou さん、ありがとうございました!
統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 4

今までの合計 5,265