メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

1.6または1.8GHz デュアルコアプロセッサー、 2GBまたは4GBのSDRAM, 64GBまたは128GB SSD

215の回答 すべてを表示

I need help with trackpad reassembly

A huge glass of hot, sugary tea was spilled on the keyboard of our Mac book Air 11.6" computer. It ran pretty well, we frantically blow dried it, etc. After that: *de nada*! I took it apart & carefully dried everything. Stunningly, it started up this morning. The problem: everything works but the keyboard & track pad. The news is mainly good: a USB mouse gave me access to everything, except the ability to type. So, I took it back apart. I found instructions online for just about everything. However, there is a cable that connects to the track pad--it has a blue end and appears to have tiny little copper connectors in it. My question/problem: I can't figure out to what on the track pad I should connect it, or how. It is NOT the cable that connects the track pad to the logic board. I seriously need to know, from anyone who can tell me, what this thing is and how I can ensure that it is properly connected. Thanks in advance for your help!

Sara

回答がありました! View the answer 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

Essential Electronics Toolkit

Small Toolkit. Big Possibilities.

Shop Toolkits

Essential
Electronics
Toolkit

Shop Toolkits

1 件の回答

選択されたソリューション

ZIF connectors use cam locks. without good lighting and a magnifier it can be almost impossible to realize/find the cam flap. Study these images and directions. The lock must be loose (open) up for the cable to slide in... then pushed down to close.

If this answer was helpful please remember to return and mark it Accepted.

この回答は役に立ちましたか?

スコア 1

コメント:

Thank you!

さんによる

Y.W. not many people bother to say "thanks"... Your parents taught you right =8^)

さんによる

コメントを追加

回答を追加する

Sara Wedeman さん、ありがとうございました!
統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 362