手順 2を翻訳中
手順2
Removal the Back and Top Covers
-
Removing the back cover:
-
The plastic cover with the "logi" logo is mainly glued on. on the top of the remote, there is a little tab.
-
Start prying with a soft plastic plectrum or a sharp knife at the bottom edge.
-
Be careful to not damage the plastic like I did - it's very soft!
-
Removing the top cover:
-
Just like the back, the top plastic cover is also just glued on and is very easy to remove.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。