Near Perfect: One step missing with my repair

問題

Original phone battery was dead and stuck in boot loop - wouldn't take a charge at all and tried all the reset functions to no avail (hard reset, DFU mode, heat up phone (not recommended), etc.).

修理

Really well. iFixit provided all the tools I needed to replace the battery and the instruction steps were clear and *mostly* detailed.

アドバイス

The issue I ran into is that the new battery connector did not line up with the socket on the logic board. When I looked at the old battery that I had pulled out, it had an accordion fold in the ribbon cable, and the new one was totally flat. So I had to replicate those folds to make the new connector line up with the socket. It was a tricky step to create those creases, and one that wasn't covered in the instructions.