注意:あなたはさきほど閲覧していたガイドの前提条件を編集しています。あなたが行った変更は、この手順を含む個のガイド全体に影響を与えます。
手順 1を翻訳中
手順1
-
Locate the two hinges on the corners of the device.
-
Unscrew the 5 2mm Phillips #00 screws in the hinges.
-
Pull the hinges up and slide bottom cover out
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。